flybar adjustment

[jmizoguchi]

changing from plastic to aluminum using some of bladecx2 parts

I'm using E-flite aluminum head with Blacdecx2 inner shaft. I need to use stock flybar linkage but seems like its off. Because I"m getting toilet bowl effect. heli turn in clockwise when I stand behind the heli where heli is moving forward.

is there best way adjust the linkage?

[Kindling Maker]

Go back to stock.

[jmizoguchi]

in way that didn't help. I need more on what is the best to tweak the linkage so that I will avoid toilet bowl effect..

[Kindling Maker]

The TBE is caused but one of the Al parts. My friend had that prob and it could not be fixed but tweeking. He had to go to the stock head, that got rid of the TBE. It is something in the CNC head that causes it.

[jmizoguchi]

mm.. any issue with 3-in-1 failure on TBE or primary issue will be flybar?

I have other thread I answered and
http://www.helifreak.com/showthread.php?t=66145

can you look at the how my 3-in-1 is doing?

[Kindling Maker]

it should not be the 3 in 1

[jmizoguchi]

I think I need to change to plastic head from bladecx2 . that is what I had before the some crash. there must be something with al head and flybar. don't understand the issue.

what do you think the technical reson? Hole that holds flybar is bigger?

[Kindling Maker]

I think that it is in the manufacturing of the head, but I am not sure.

[jmizoguchi]

I just noticed some.. blade holder I'm using from bladecx2 with Eflite AL head has some play. I installed 3mm washer to close some gap on one side and flybar is more accurate

I'm thinking that was one of my problem but still no joy on fly right. I haven't spend time on this fix and if goes any better. I have feeling I need to go back to where I was before the crash but worth learn some......

hard for RC car guy to step in heli..:lol: