Throttle Curve

[ghayes]

What are you guys running for throttle curve in normal mode.

[ghayes]

I haven't put my govenor in yet. With a linear curve the headspeed seems high.

[george0079]

Throttle curves are specific to each individual setup. My curves will mostlikely not work for your setup. And yours won't work on mine.

[freeflyn2001]

mine are 0 35 50.5 60 80. This is a baseline you can start with, it produces a pretty low head speed for me "don't have a TACH". I only run In ID up using my GOV which is set up for 1800 N and 2000 ID up. Just have the Curve for a Back up. Try it and adjust to your Liking, If you don't have a Tach Use your ears.

[Burt]

I take it you break in engine with the governor off? I also need a baseline throttle curve for the first 5 tanks can I just use 0 25 50 75 100 for this pitch curve?
-3 -1.5 0 +5 +10

[Bond007]

ghayes You don't have to run a linear curve. Lower your throttle curve slightly and try again.

Burt Yes, break in the engine before putting a governor on.

Did you mean your pitch curve is -3 low, +5,mid, +10 high. If so, that throttle curve is as good as any to start with.

If your pitch curve is -3 low, 0 mid, +10 high, then I'd alter your throttle curve to 0, 25, 40, 70, 100 as a starting point. 50% throttle at 0 pitch will give you a high headspeed.

[ghayes]

Thanks guys.