Rd 6000 Super6ch, models selection

[bowman]

ladys And gents, I have A Question concerning this Radio,I am wondering if yous Can help me, As i am :arggg: with this Issue.
I would Like to add 3 models to this Radios memory (helis)
But It seems i cant.
According to the Instructions you Have to press the End button Till you come up on the Default Screen, But nothing Happens when I press the
End key! :arggg:
Is it possible that this feature (model select) Has been Locked Out,
On this Radio. Is That poss?.. :?
got it off Ebay Along w/ A "carbon trex" :thumbdown:

[TMoore]

Download the manual from www.airtronics.net.

TM

[Matt Lowdermilk]

http://www.airtronics.net/Super%20Manual%20Final.pdf

You will need adobe to view this file.

Matt

[bowman]

Thanks guys I have a manual just did not read it properly.
It Appears that in order to choose models by way of the end button, you must first store them to memory (modelselect/store feature). :hammer
I am just adumbazz noobie trying to hurry things :roll:
Matt
how long have ya been in deland? I'm from there across from stet uni
do you Remember the Athens theater? :lol:

[Matt Lowdermilk]

Yes, the Athens is still getting its remodel. They are hoping to get enough to remodel the inside as well.

We have a Lowes now too!!

[bowman]

wow
I used to spend all (most) my time in there playing defender. as soon as you would walk thru the athens front doors to the left was a game room, drank one two many beers there too :wink:

[Matt Lowdermilk]

How long ago has it been??? They haven't used that building in years.

Ever get this way any longer. Give me a yell. We'll get some flying in.

[bowman]

my high school/athens theater/crows buff/cowl road/blue springs/deleon springs/ years/ woo cant Remember too much beer and other assorted things :wink:
nahh just kidding 81-84 moved to winter park then new jersey :?
its been a while since i've seen my home turf moved up to jersey after some girl
20 years later I think she won :dontknow
thanks for the Invite
If I make it back I'll give you a holler I'll bring my fleet and we'll go fly!
thanks matt.
Rod

[bowman]

MATT
you there?
gotta question About Eccpm and the RD6000 super.... help dude!
Are any of You'r birds Eccpm and on this TX.
Just got my trex cde built. I have worked out most of the bugs xcept one
Aileron!
no matter what i do its Reversed. right stick tilts the heli left and viceversa
I am on heli1
the swash type, I have set to ccpm-b, trims at 0, and dont know why nothing works Right Unless I switch the servos to Reverse On elev and ailerons.
when I reverse the servo direction on these 2, the swash moves up evenly the
elev works as it should but aileron still reversed.
If I switch them 2 servos to norm no inputs work Right- collective ends up where
aeil is (right stick) and so on.
I'm asking ya matt cause you responded to my 1st question About the Rd 6000
And ya knows you'r Airtronics.
But If Anybody out there knows what the hell I'm talking About, HELP!!

[Matt Lowdermilk]

Yes, I know whats going on. I need alittle more info though to get it straight.

Which servos are in which channel on the RX?

what is thier position on the swashplate?

(i.e. channel 2 = pitch, channel 3= aile, and so forth. and then pitch is on the right, aile is on the left, blah, blah, blah. )

Thanks
Matt

edit: and is it 120 degree or ...

[bowman]

:)
thanks matt ok here it goes

Om my Electron 6ch Rx,
ch1- elevator
ch2-aileron
ch3-throtle/ wire from CC35a esc
ch4-Gy 401
ch5-single wire fromGY401
ch6- pitch

120 deg swash- ccp3-b
Elevator ball in back- from behind the swash, the aileron servo should be on right
the pitch servo should be on left.

but instead the radio operates the aileron as pitch and the,
Pitch servo on left as aileron
so when I turn the right stick to the right heli tilts left///// right stick to the left
heli tilts right.
every thing else works right,
this Remains this way so long as the servos Are reversed on the servo
reversing screen of the Tx
If I set them to normal the set up changes horribly nothing works right

The same thing happens when I switch the pitch and aileron servos on the
Rx aile ch2- to ch6- and collective ch6 to ch2 this throws everything off..
so with these 2 ch swapped I then go the servo reversing screen of the Tx
and reverse/norm, them there. that has no effect neither. it works all wrong

Untill I put the aile on ch 2. and pitch on ch6 and change from norm to Reverse
on Tx screen
some sort of normalness then insues with the exception of the fnn reversed eileron

I know Ultimately its that i'm doing something wrong.
All other wrong stuff I was doing with this Radio I've been Able to figure out,
this shit however has me wooped!!

Also the instructions for the trex cde at the back shows what channels the servos should be plugged into.
On A Jr Tx It saiz this for the 120 swash-
ch2-aileron
ch3- elevator
ch6-pitch
elev ball in back, pitch on right, and aileron on left.
.I have also tried this with throtle ending up on ch 1 and nothing :dontknow

my Rd 6000 does'nt have a swash mixing menu Or does it?
thanks for any help matt
one more thing
have tried all the other options of swash plates on the tx and nothing
:arggg: :bomb: :arggg:

[Matt Lowdermilk]

The first thing to do...

make a heli (type) model in one of the memory slots. Do not copy anything, start from scratch.

With out changinge anything on the new model, turn on the radio TX and Rx. Move the aile, pitch, and elev. sticks and make a note of which servos move in relation to each stick.

(i.e. right stick back and forth = which servo and which plug on the Rx, then right stick left and right = which servo and where its pluged into the Rx.)

for example...
elev = rear & ch. 1
aile = right side of heli & ch. 2
pitch = left side & ch. 6

the servos will move by them selves this way and tell us what channel the rx thinks is aile and pitch.

[bowman]

MATT
You Airtronics/eccpm genious you!!
:noteworthy
I just got back from the park.
got some triming Issues to deal with.. As I'm hovering the heli tilts badly to the right.
Rudder is A little off, too much right input to keep the nose straight.
No big deal.
Even with these faults it still is a nice flying heli At least now I can say that
Now that i've flown it,

Thanks to you matt You da man!! :thumbsup2:

[Matt Lowdermilk]

No problem. Glad your getting some stick time with it. Now you can decide if you like ccpm of not. :D