Mikado Vbar electronics and Head for Trex 600

[Jafa]

Hey hey hey

They are now available - mines on the way - can't wait to install it!!!

[tcast305]

I've had mine for a month and half. They were available from realraptors and fxaeromodels.

Here are pics of mine:

[wcc963]

hey alex are there any vids of you flying this yet?

is there a noticable power increase?

i just put the torque tube, and raptor 90 clutch liner in mine.

i wanna get the multigov and carbsmart.

[Jafa]

The head looks so much cleaner - less complex

Any chance I can get your VBar config file?

[wcc963]

The head looks so much cleaner - less complex

Any chance I can get your VBar config file?

yea alot of people dont know that those mixing arms are for the flybar and not really needed.

[tcast305]

The head looks so much cleaner - less complex

Any chance I can get your VBar config file?

Here is my file. You will have to check servo directions and I have my sensor with the wires pointed back so it would have to match yours as well if not check the reversing on the gyros on the main page.

I've disabled my AOF as I would getting an elevator issue, but AOF is not needed if you using 40 or less cyclic gain.

I suggest you get the lastest version (beta) off www.vstabi.de as it makes the setup alot easier.

[rcmarty]

Hey there , anyone know if the grips can be had in metal ?

I prefer metal on the grips.

Another Q , is it possilbe to use the quk swash on this setup ? The instructions mention changing out the balls on the inner swash, the quk swash uses longer balls than the stocker

Martin :)

[Jafa]

Thanks TCast - I apreciate I have to be careful but it's the general setting values I'm interested in to ensure I'm in the ball park

The new 3.13 software looks pretty cool!

[tcast305]

Hey there , anyone know if the grips can be had in metal ?

I prefer metal on the grips.

Another Q , is it possilbe to use the quk swash on this setup ? The instructions mention changing out the balls on the inner swash, the quk swash uses longer balls than the stocker

Martin :)

No metal grips available. None of the mikado helis come with them, because there is no need.

The plastic grips from Mikado are SUPER stiff, unlike the Align plastic grips. If you put them side by side you will see how much more stronger the grips are, the align ones you can flex with you hand, but try that with the Mikado grips.

I haven't tried the uk on my flybarless, but have it on my flybar 600n, and its very nice swash. I noticed the the balls on the uk swash are bigger and seem to fit the mikado ball links nicely, while the Align ball links require sizing.

Thanks.

[rcmarty]

Good to know , sound like quk is one step ahead :)
I'd prefer to use the included balls anyways.

Martin :)