Prime12
03-26-2008, 08:53 AM
Selling all my T-rex related stuff.
1. T-Rex airframe + cyclic servos + extra parts SOLD
http://user.chollian.net/~sa12/trex1.jpg
http://user.chollian.net/~sa12/trex2.jpg
The T-Rex started its life as a stock 450SA. I have added following parts to the stock airframe:
- Align Aluminum Swashplate
- Align Aluminum Flybar Seesaw Holder
- Align Carbon Fiber Tail boom
- Readyheli Carbon Fiber Horizontal / Vertical Fins
- V2 main gear
- Ceramic bearings for the main blocks and tail cases
- 1 set of Align 335 PRO Woodies
- 1 set of Helidirect 335mm Carbon blades. Balanced and flown ONCE.
- 2 Canopies, one with carbon fiber windshield. Red one has a crack on its
side but is still usable.
As you can see in the picture, it will come with 3 Towerpro 9g cyclic servos pre-installed.
With purchase of the airframe, you will ALSO get the extra parts that are shown in the picture with the airframe. As you can see, there's quite a lot, so see for yourself as of what exactly you'll be getting. Hmm... I'm already seeing spare main gears, tail drive gears, spare main shafts, feathering shafts, never used trueblood dampers, tail boom supports.....and those are only fraction of what's being offered as extras :)
$200 shipped for the airframe + cyclic servos and ALL the extras! SOLD
2. Like new JustGoFly 450TH motor w/ 13T pinion. SOLD
http://user.chollian.net/~sa12/jgf.jpg
- Only flown 10 times. It is one of the most highly regarded motors for 450 size helis. Go to trextuning.com for a review. Will ship in the original box it came in with all the mounting hardware and gold connectors.
$45 shipped. SOLD
3. Castle Creations 35 Brushless ESC + Dimensions engineering ParkBEC. SOLD
http://user.chollian.net/~sa12/cc35.jpg
- Both less than 3 months old. I am too lazy to desolder and sell them separately... my loss is your gain.
$65 shipped. SOLD
4. Futaba S3154 Digital sub-micro servo. SOLD
http://user.chollian.net/~sa12/servo.jpg
- Fairly new, used for less than 20 flights. Should make a great tail servo. Will ship in the original box it came in with all the contents. (I never used the included servo horns so they're all untampered :) )
I'll throw in a S3153 Digital that has cracked case but works fine.
SOLD
5. Common Sense RC 3S 2100mAh 15C LiPo.
http://user.chollian.net/~sa12/csrc.jpg
- Has around 60 cycles on it. It's NOT puffed, but doesn't pack much punch anymore. It still takes full 1700+ mAh when charged from 3.7v resting voltage. Should be great for hovering, FF and orientation practices.
$25 shipped.
6. Thunder Power Prolites 3s 2100 15C LiPo.
http://user.chollian.net/~sa12/prolite.jpg
- Pretty much new. 8 Cycles, and that include 6 break-in cycles.
$55 shipped.
ALL PRICES ARE FIRM. I will be happy to answer any questions you might have :)
1. T-Rex airframe + cyclic servos + extra parts SOLD
http://user.chollian.net/~sa12/trex1.jpg
http://user.chollian.net/~sa12/trex2.jpg
The T-Rex started its life as a stock 450SA. I have added following parts to the stock airframe:
- Align Aluminum Swashplate
- Align Aluminum Flybar Seesaw Holder
- Align Carbon Fiber Tail boom
- Readyheli Carbon Fiber Horizontal / Vertical Fins
- V2 main gear
- Ceramic bearings for the main blocks and tail cases
- 1 set of Align 335 PRO Woodies
- 1 set of Helidirect 335mm Carbon blades. Balanced and flown ONCE.
- 2 Canopies, one with carbon fiber windshield. Red one has a crack on its
side but is still usable.
As you can see in the picture, it will come with 3 Towerpro 9g cyclic servos pre-installed.
With purchase of the airframe, you will ALSO get the extra parts that are shown in the picture with the airframe. As you can see, there's quite a lot, so see for yourself as of what exactly you'll be getting. Hmm... I'm already seeing spare main gears, tail drive gears, spare main shafts, feathering shafts, never used trueblood dampers, tail boom supports.....and those are only fraction of what's being offered as extras :)
$200 shipped for the airframe + cyclic servos and ALL the extras! SOLD
2. Like new JustGoFly 450TH motor w/ 13T pinion. SOLD
http://user.chollian.net/~sa12/jgf.jpg
- Only flown 10 times. It is one of the most highly regarded motors for 450 size helis. Go to trextuning.com for a review. Will ship in the original box it came in with all the mounting hardware and gold connectors.
$45 shipped. SOLD
3. Castle Creations 35 Brushless ESC + Dimensions engineering ParkBEC. SOLD
http://user.chollian.net/~sa12/cc35.jpg
- Both less than 3 months old. I am too lazy to desolder and sell them separately... my loss is your gain.
$65 shipped. SOLD
4. Futaba S3154 Digital sub-micro servo. SOLD
http://user.chollian.net/~sa12/servo.jpg
- Fairly new, used for less than 20 flights. Should make a great tail servo. Will ship in the original box it came in with all the contents. (I never used the included servo horns so they're all untampered :) )
I'll throw in a S3153 Digital that has cracked case but works fine.
SOLD
5. Common Sense RC 3S 2100mAh 15C LiPo.
http://user.chollian.net/~sa12/csrc.jpg
- Has around 60 cycles on it. It's NOT puffed, but doesn't pack much punch anymore. It still takes full 1700+ mAh when charged from 3.7v resting voltage. Should be great for hovering, FF and orientation practices.
$25 shipped.
6. Thunder Power Prolites 3s 2100 15C LiPo.
http://user.chollian.net/~sa12/prolite.jpg
- Pretty much new. 8 Cycles, and that include 6 break-in cycles.
$55 shipped.
ALL PRICES ARE FIRM. I will be happy to answer any questions you might have :)