View Full Version : Steven Fox flying G5
Rotorworkz
03-27-2008, 06:42 PM
Here ya go boys another video of G5 Flown by Steven Fox
Setup as follows
Prototype G5 with G-10 frame
Outrage XP 6s 1300mah 25c battery
Medusa 28-40-1700kv 11t pinion
Hobby Wing 40amp ESC
Hobby Wing BEC
Spektrum RX
HS65MGs
Spartan Gyro
9257 tail servo
Rotortech 350mm blades
13 +/- pitch
9 Degree Cyclic
Tached Head Speed 2780 RPM's
Average Hard 3D flight time 5.5-6 minutes before noticed power drop
http://rotorworkz.com/steven1.zip
Enjoy
LITHIUMSTATIC
03-28-2008, 12:08 AM
Is this the same one you had at B'ham?
fsusmithc2
03-28-2008, 12:56 AM
Based on the specs it would seem to be the same one. But I spy with my little eye, the production canopy on this one. Very nice. This thing is going to rock! :YeaBaby:
Rotorworkz
03-28-2008, 10:18 AM
Is this the same one you had at B'ham?
Jeremy,
Yes only change now is the production canopy oh and no nitro background noise :)
eheliflyer
04-14-2008, 12:58 PM
Charley,
It looks better and better everytime you post a new vid. Can't wait to get my hands on one! :)
How is the support for the funky lipo and blade size turning out ?
Rotorworkz
04-15-2008, 10:39 PM
Alvin,
I have more videos of HC flying that we got over the weekend in boston all I can say is wow!!! HC lovies it we are now doing Hard 3D on about 2350 and 2500 RPM HS with last flight recorded over 6 minutes. many are use to 450 size helis having over 3k to perform but we are doing it on 2350 No BS here!! stay tuned!
Rotorworkz
04-15-2008, 10:40 PM
HFG,
Support for battery's and blades should be well off! stock of CF, woodies, and FG blades will be plentiful upon release of this kit
Your not making this easy Charley !!! I am already planning to get bandit, L400 to add on to my V2 fleet. Hmmmmm a 4th heli couldn't hurt :)
LITHIUMSTATIC
04-16-2008, 01:33 AM
HFG,
Support for battery's and blades should be well off! stock of CF, woodies, and FG blades will be plentiful upon release of this kit
That's good news Charley! Looks like I will be adding more to my fleet.
helibrite
05-01-2008, 12:15 AM
Charlie,
I been checking this bad boy out and I must say I'm ready to try one out, keep up the good work.
Rusty
Rotorworkz
05-01-2008, 12:30 AM
Hey Rusty,
Thanks you will like it, G5 is different and rather hard for most to believe that this thing rocks on a 2400-2500 RPM head speed!