servo wheel for EB

[phoneman]

What size servo wheel shoild I use for the rudder servo ? The manual says use the small wheel--is there a recommended distance from the center of the wheel and the center of the ball ? I'm using a Futaba 611 and the small wheel only puts the ball about 8 or 9 mm away from the center of the wheel--looks pretty close. Now if I can get this Duralite Geminii regulator figured out I might be able to get this bird fired up--thanks for any help--Dean

[cbergen]

The 611 is a little more forgiving in setup than the 401.

You can use a larger wheel, you will then set up your travel limits in the gyro to get full throw in either direction without bottoming out. Try to get the same amount of throw in both directions by properly centering the pitch slider as shown in the instructions.

Set your gain in AVCS and Normal at appx 37%.

[phoneman]

Thanks Chris--the small wheel just looked like it put the ball too close to center--Thanks--Dean