401 Gyro- Need Delay With Analog Servo??

[sleddog7]

Quick question about delay and a 401 gyro. I have 2 Rex SE's that fly great with the 9650's (delays are set to "0"). I'm setting up a Rex SA with a Hi-Tech HS-81 analog for the tail with a 401 gyro for student/instructor/beater use (DS is switch off).
Should I set the delay to "0" for this servo? What EXACTLY does the increased delay do to a NON-Digital servo?

Thanks for any advice guys.

[fiveoboy01]

I believe the delay is there to change the servo response so the tail does not bounce in certain maneuvers. I know it's something like that, missing the right words to describe it...

[mlucia]

http://www.futaba-rc.com/team/team-tip-002.html


"The delay trimmer should remain at 0. If a servo other than the 9253 or 9254 is used, some amount of delay may be required to soften the bounce/rebound of the tail at the end of quick rudder inputs."

[sleddog7]

Thanks guys, and the link too... It's clear to me now.

Mods: Sorry you had to move the topic... I should have known better to put it here.