Setups?

[derelict]

well.... i think the switchglo is overpriced.... but it's still pretty cool :-)... i don't like the idea of a multi purpose device like the "2 in 1".....

this way... if the remote glow device failes.. who cares ? if the power switch fails.. who cares ? if the lipo monitor fails.. who cares ??

if the "2 in 1" fails ??? i DO CARE !!!!! :glasses2:

secondly... i'm way to lazy to have a normal remote glow plug :-)

Greets

Marcel

[nwolsink]

I am going with:

-JR DS 8717 for cyclic
-Futaba BLS451 for throttle
-GY611 with S9256
-Spektrum 7100
-MultiGov Pro
-EvoLite 2500
-OS MAX 91 SZ-H PS
-MP 5
-RADIX 690mm Carbon Blades-RADIX 105mm Tail Blades
-V-Paddles 90mm

[LoveMyTrex]

why would you use a BLS451 on the throttle? to me that is overkill, plus they cost the same as 8717s.

[nwolsink]

why would you use a BLS451 on the throttle? to me that is overkill, plus they cost the same as 8717s.

Other "fast" servo's are nearly as expensive as the BLS451, what servo would you recommend otherwise?

[stmpngrnd]

os 91 with mpII
710 rotortech
(3) 9452 on cyclic
ar7 with spectrum reg/stepdown for tail/throttle
g500t w/9254 on tail
hs-56 on throttle using an adapter plate
will start with the included gov but have a spare tjpro ready as well
carbsmart w/hs-81
align 2 in 1 (not a single problem with the (2) I run on my other heli's..not afraid)

very modest setup..no crack here as I wouldn't know what to do with..at least not yet;)

[Bobbyk]

You may want to use the HS81 for thottle and the HS56 for Carbsmart, the align plate might not fit the HS81, well not on the T600N.

Robert

[stmpngrnd]

You may want to use the HS81 for thottle and the HS56 for Carbsmart, the align plate might not fit the HS81, well not on the T600N.

Robert

dumb thumbed the keyboard...hs-65(not 56)on throttle. this is the set up I use currently with the g-force adapter an dit works great!. just a little dremel work and the 81 fits the Align plates.

[Dflyer]

Hi guys,

my set-up will be like this :

OS 91 SZ-H
Hatori 938 pipe
Radix 710 Stickbangers
3 x Hitec H6975 on cyclic
GY 601 and S9251
S9254 on throttle
Align governor
Arizona regulator
2S 2000 mah FP lipo

Grtz,
Dirk

[zyklon]

My budget setup will be

YS91SR
MP5
Radix 710SB
ATG+9254
Solid-g+ BLS251
ino lab 760mg X3
Dualsky VR-8L + Evo-rx 2100mah

Just need the heli kit.

[louie456]

So far I know I will be using

YS .91SR with an MP5
JR X9303 with R921 RX
Futaba BLS451 Brushless cyclic(may go with some JR 8717's)
Futaba BLS251 Brushless Heli Rudder High-Torque Servo
Align 2in1 regulator
Multi-gov
Spartan DS760 Gyro
Radix Main and Tail blades
May go with some Super Stubz but will try the stock paddles
Can someone please respond let me know if the esky 3900 is ok for trex 450 3d flight,I also need to know how to set a spectrum dx6i controller,need to know how i should have the settings,on all 6ch.Im very new to this spectrum and Im alone in this new hobby,thanks

[louie456]

My budget setup will be

YS91SR
MP5
Radix 710SB
ATG+9254
Solid-g+ BLS251
ino lab 760mg X3
Dualsky VR-8L + Evo-rx 2100mah

Just need the heli kit.
I have a esky honeybee king 2 cnc 43t pulley all carbon,a lot of money into it trex tail,its for sale i put stock motor and stock gyro back in 250.00neg. CONTACT ME AT lou4u77@hotmail.com.I have pics only flown indoors

[Locktite]

Now that we are close to release I have my Final Set-up..

YS .91SR
Hatori Pipe for YS
Reactor X Regulator
8717's on cyclic
9452 on throttle
Align Gov for now since it will be included
Radix blades
Spartan or logictech gyro

[toaster12]

This is what I have waiting for the 700

OS .91 Pumped
Hatori SB18
Reactor X Regulator
BLS451's on cyclic
ATG
Rotortech blades
Spartan DS760 & 8900G
Carbsmart
AR9000

Just waiting for the kit !