View Full Version : Los Angeles Heli flyers.
emag remrofni
08-09-2008, 12:01 AM
Hey Mitch, you wanna meet up at Robin's field later on? (around 10)
HeliSmith
08-09-2008, 02:18 AM
Just use the multigov pro. It's a travesty to call that thing that comes in the kit a governor.
I am still running the stock governor on my 600NSP. I was going to install the Multigov on it but then I had to have the 700N. :roll: So now all resources are being redirected to get the stuff for the 700 everything else is on hold..
Lota Fun R
08-09-2008, 10:00 PM
Hey Mitch, you wanna meet up at Robin's field later on? (around 10)
Just got back in from a great day of flying Trabuco cyn.
Talked to Bert, he said they spent all day leveling out Apollo bench area in preparation for concrete. Apollo is closed for now until concrete gets poured from my understanding, I could be wrong so please double check.
A few of us are headed to Whittier tomorrow, hope to see everyone out there. :YeaBaby: :thumbup: :smokin: :cheers :clappp :Bang :hug: :)
emag remrofni
08-09-2008, 10:21 PM
Just got back in from a great day of flying Trabuco cyn.
Talked to Bert, he said they spent all day leveling out Apollo bench area in preparation for concrete. Apollo is closed for now until concrete gets poured from my understanding, I could be wrong so please double check.
A few of us are headed to Whittier tomorrow, hope to see everyone out there. :YeaBaby: :thumbup: :smokin: :cheers :clappp :Bang :hug: :)
Yes I ended up going to the basin today as well as Bert. I don't think it will be closed until the concrete will be poured. I just know that the tables are moved off to the side.
HeliSmith
08-09-2008, 10:54 PM
That's sweet wish I would have known I woulda helped.
BiggerDanno
08-11-2008, 11:24 AM
Dan you have all the parts you need for the 700N? What motor did you go with and blades? I don't have anything except the 700n itself but I hope to have the kit built this weekend. Then I have to buy the rest a little at a time.
Well I have the Multigov Pro but that isn't an accomplishment since the kit comes with a governor already. lol
Mike,
I've got everything except flight battery and throttle servo. The kit should be here tomorrow. :banana
I'm going to use the YS 91-SR with Hatori SB-19, 8717's on cyclic, 8900G on tail, Spartan gyro, CarbSmart, Radix 710 SB.
HeliSmith
08-15-2008, 12:43 AM
Nice setup for sure!
I am torn between running 8v JR8717 and running 6v BLS451 still. What I know I will run is either AR7000 + Fromeco or AR7100 straight 8v. I will run the 600N at straight 8 if I decide to go BLS451 and swap parts over.
New OS .91HZ "Align motor black head"
Align governor for now + 3151 throttle
Hatori SB18 and maybe the Kasama header later
Spartan + 9256
CY 710 SB
Lots and lots of 30% nitro! :D
BiggerDanno
08-15-2008, 09:54 AM
Mike,
Decisions, decisions, eh?
You need a Fromeco? I've got an extra one.
I started the build last night. Got the head done. Frame next.
BiggerDanno
08-15-2008, 01:15 PM
Mitch, Whittier tomorrow morning?
Lota Fun R
08-15-2008, 09:45 PM
Mitch, Whittier tomorrow morning?
Sounds good to me. :thumbup:
Earlier is better.
HeliSmith
08-15-2008, 10:27 PM
I always want to go early but everyone else wants to go late. Too bad you are too far away Mitch.
Dan I have a Fromeco going to swap from my 600N. I have decided I am going with the BLS451 servos.
Lota Fun R
08-16-2008, 01:38 AM
Mike: I drive around as much as anyone just to fly with friends.
Whittier is a great place to fly, lots of room.
emag remrofni
08-16-2008, 01:55 AM
Mike: I drive around as much as anyone just to fly with friends.
Whittier is a great place to fly, lots of room.
Well if you want to fly with friends Mike and I are meeting up at our field around 5.
HeliSmith
08-16-2008, 01:57 AM
Mike: I drive around as much as anyone just to fly with friends.
Whittier is a great place to fly, lots of room.
Yeah I need to come down there I still haven't been. Got the kiddies this weekend so I am stuck local.
BiggerDanno
08-16-2008, 11:32 AM
leaving now.:P
Lota Fun R
08-16-2008, 05:43 PM
Great day to be out flying my Raptor. :thumbup:
The 450 was rockin pretty good too.
HeliSmith
08-17-2008, 12:31 AM
That's great to hear Mitch I am glad you had a good day of flying. Flew 2 tanks and then mine wouldn't start. I am sure it was the glow plug as I noticed the first two flights I was down on power. Went to swap out the glow and no tool. Ah well at least I got two flights in.
Ah Clem
08-17-2008, 01:19 PM
Mitch,
How is the leg doing?
Lota Fun R
08-18-2008, 03:53 AM
I missed the action today. :(
BiggerDanno
08-18-2008, 10:56 AM
I missed the action today. :(
Sleepyhead.:arggg:
Lota Fun R
08-19-2008, 03:23 AM
I was kinda beat up from the day before, it was a long day.
Lota Fun R
08-24-2008, 01:28 AM
Apollo on Sunday.
Great show next door from 10 - 3:00
http://img.photobucket.com/albums/v237/hochsj/USA2STROKERS/woodley.jpg
JaggedEdge
08-25-2008, 02:54 PM
Apollo on Sunday.
Great show next door from 10 - 3:00
OOooops. I missed it :bawl
HeliSmith
08-26-2008, 12:47 PM
Missed it too.
Lota Fun R
08-27-2008, 04:58 AM
The show was good.
On point, Apollo field will be good to go soon. Upgrades in progress.
It's a good place to fly, I like it.
I also like the Whittier Narrows, Big flying area, more than one can fly at one time.