RCP 1000w 1100kv motor

[istandalone]

does anyone know of a website or such for rcp? i'm looking for some specs for this motor, such as can it be ran on 3 cells lipo for my plank. i know when running 6 cell lipo, you'll need a 60 amp esc, but how about when it's on 3 cells? would a 30 amp esc suffice?

[concept1]

good luck, it's hard to find but while ready heli still carried the RCP's I saved this info. but nothing on cells

An Efficient & Economy brushless motor line for Helis

The new RCP HE35 series brushless sensorless motor is a light weight motor with over whelming power range from 700-1500 watt power. The Fan unit at the back of the motor ensure the motor remain at lower temperature in hi-power through put. Quality, Strong and Efficiency are what you can expect for the motor!

　 H/18/11H H/24/11H
KV 1,100 1,100
Continues Amp 50 60
Max Amp 60 70
Power Watt. 1,000 1,500
Weight g 169 212
Magnet poles 8 8
Shaft Length mm 65 80
Motor Length mm 48.0 54.5
Shaft Diameter mm 5.0
Motor Diameter mm 41.5
Maximum RPM 25,000 RPM
Magnet Neodymium (150ﾟC temperature tolerance)

[Vinger]

does anyone know of a website or such for rcp? i'm looking for some specs for this motor, such as can it be ran on 3 cells lipo for my plank. i know when running 6 cell lipo, you'll need a 60 amp esc, but how about when it's on 3 cells? would a 30 amp esc suffice?
No never 30 Amps, look at http://en.wikipedia.org/wiki/Ohm's_law that should give you an idea. My thinking would be to use the same controller rated for the motors wattage see

http://www.sengpielaudio.com/calculator-ohm.htm

[frankreh@rogers.com]

Hi

try this site

http://www.ultraflymodel.com/product_motorHseries.html

Take care and have fun

Frank

Hurricane 550 with a TT E620 Tail rotor hub and grips stalk motor H/19/H for now CC 80 ESC
Trex 450SA Scorpion HK-2221-8 Motor, CC45 ESC-first heli so it's a keeper
Trex 450SE V2 Alighn Motor CC 45 ESC
JR 9303 tx with 7 channel PCM receivers in the Gaui and SE
Spectrum 7 channel radio with a 7 channel Spectrum receiver in the SA

[istandalone]

thanks for the links, everyone. after much research, i'm now looking at one of those scorpion esc's from readyheli. the 60 amp esc, that has an internal 3 amp switching bec looks very very sweet. i mean, being able to program it without having to switch any wires around or even hook it up to your computer? it sounds too good to be true. i've gotta try one. if i get that esc, then i can use my phoenix 60 for my plank project. thanks again.

[istandalone]

so i guess my last question is, can i run the rcp motor on three or four cell lipo? can't seem to find that info. i've ordered a cc 85hv for my hurricane, and i'll be able to use the phoenix 60 for my plank.