BC6 proble charging my evo 25 6s 2500

[noste500]

My Bc6 will not charge my 6s batts at anything above 2.3 / 2.4a
If I set it to anything above , it just doesn't go any higher.
I have tried my 3s bats and they are fine,ie; they will go up to 5a if I set it at that rate.

I have another bc6 and multiples of the above bats, The other Bc6 will not go above 2.4 either, ( with the 6s bats )
Therefore I pressume it isn't the charger as both are doing the same.

Both my 6s bats are doing the same.
The bats are newish, ( 5 cycles ) with no more that 60% -70% taken out.

They did charge at a higher rate before but now I don't understand why they won't charge above 2.4??
Any clues?

[RC Accessory]

The BC-6 has a 50 watt maximum output. On a 6S pack, that is about 2.2-24 amps depending on how low the voltage of the pack is. Check the back of your manual for the max output chart per cell count.

[noste500]

Thanks,
Is there a bantam charger I can use to charge a 6s @ 2c?

[RC Accessory]

Thanks,
Is there a bantam charger I can use to charge a 6s @ 2c?

2C is relative to to the pack size. The BC6-10 is 200 watts of power.

[noste500]

Would that charger charge a 6s 2500 22v @ 2c?

[RC Accessory]

Would that charger charge a 6s 2500 22v @ 2c?

yes

[noste500]

Thanks