Belt CP Instructional Videos

[Ber60]

Made some vids to use at your discretion feel free

1) Rotor direction 8QIU4ZXgYJw

2) Motor pinion tentiondVNHYtg0p4c

3) Belt tentionXjnYeYQiXsc

[DierWolf]

..

[Ber60]

Hope I don't get in competion with our benefactor (MR BOB) :):)

[another_finn]

[EDIT: Thanks :)]

Great videos - might seem like really simple things, but somebody always asks and these explain it much better than words. Especially loved the first one too - might actually be lucky our office firewall won't let video through...

Ooh, and now that I've reserved a space in this thread I guess I'll have to shoot some videos.

[CodeB4U]

LMAO @ music, nice video's. Someone is going to need them sometime. Better then being explained by words.

[Ber60]

It was raining today so

0LpKiT2QrYs

Enjoy

[CodeB4U]

What kind of paper should i use because there are different thickness of paper to check my motor pinion tention

[Ber60]

Any paper (about 80 grams) will do, paper used in printers, copiers, magazines. Use the most commen paper, it will give you about 0.1 to 0.2 of a mm play on the gears

[kitenutuk]

excellent vids the last one will help me rescue the bad gear that was shipped with my heli i should get new gear in post tomorrow :-) then i can start to learn to fly it and thanks to you ill have a spare one:thumbup:

[goshawkben]

Nice one mate very infomative to a newbie like me:lol:

[TXflyheli]

Great video. Nice work

[gerrydobro]

Hey Ber60 I really like your videos and they are very helpfull! but only if you could get Barry White to narrate (if he were still here) that would be the icing on the cake!:smokin:

[Ber60]

It is like asking Elvis to do a commercial :thumbup::thumbup:
very very hard to do

[Roadhog_RNA]

Made some vids to use at your discretion feel free

1) Rotor direction
2) Motor pinion tention

3) Belt tention

Thank You so much!!!! You have no idea how much work you saved me... Im new to Helo's and these vidoes are exactly what i needed...

[Ber60]

I am happy they helped you :thumbup:

[cpc7084]

Happy day,

I have some wonder about my li-po battery.

1) After every 10-15 mins flight with my belt CP, I felt that the battery temperature quite high. almost can't hold it on hand. Is this OK?
2) The Belt-CP manual said that "charge time cannot exceed 120 mins", but I need about 6++ hrs to charge my 11.1V 1800 mAh li-po batery and about 7++ hrs to charge the 2100 mAh. Is this what it should be?
3) What the discharging rate : 20C/10C means?

Thanks

[Ber60]

1) Judging on your flight times you discharge the battery too far that is why they get so hot, try to keep your flight time below 10 min for the 1800mA battery
2) With the stock charger and batt charging time is about 3 to 4 hours, 6++ means there is somting wrong with the charger or battery. My guess a faulty charger , a good/better charger ( no Esky one) would do the job in 1 hour.
3) Discharge rates : 1C = charge rate ,in your case 1800mA/2100mA
..............................10C =10 * charge rate or 18000mA or 18A
..............................20C = 20 * charge rate or 36000mA or 36A

Hope this helps

[cpc7084]

Thanks Ber60

What you mean is below 10 mins per flight? because what I mean 10-15 mins is where I hovering then landing, hovering then landing...

The quick charger that you mentioned is it what they call "Balance Charger"? No problem to work on any type/brand of li-po bettery? My betteries are from e-sky.

[Ber60]

If you deplete your batteries to far they will get hot, if you are not sure what flight-time stop every 2 mins and feel the battery temp and stop when the battery feels to hot you will notice it will be below or around 10 mins. If a lipo is run to hot to frequently it will shrink the battery's lifetime.
Yes it is a "Balance Charger" and it will work on Esky batteries too.
I am sorry I can't help any further because I am going on holliday but if you need more info on chargers just ask the guy's I am sure they will help you :thumbup:

[cpc7084]

Thanks again Ber60. Happy holiday.

[let60]

Go to http://www.fmadirect.com/products.htm?cat=45&nid=4 and get the Cellpro 4s. It is a great charger. I have had mine to for about 1 1/2 years and can charge a 1800 in less than 45 minutes.

[TXflyheli]

Helpful info. Thanks for sharing

[stumpe]

Guys

This charge is 'Buy one Cellpro 4S Charger at full price and get the second
4S Charger for half off! – A savings of $37.48!
Hurry, this offer is only good until September 30th.'

Sounds like a good deal to me:hug: