Maximum headspeed

[paintballkidz]

what do you guys think the maximum head speed for a stock plastic headed mini titan is.

[LITHIUMSTATIC]

I'd say not very high without risk. I took the risk and after only replacing the upper and lower mixing levers to metal I ran mine at over 3,200 without problems. Hundreds of flights I did.

Just be sure you don't have blade flutter. I had it until replacing the mixing levers to metal. I didn't fly it with blade flutter as that is dangerous. I saw it during my first spool up and immediately went to metal upper and lower levers.

If your talking no modes and plastic head, plastic mixing arms and all. I wouldn't go higher than 2,700

[paintballkidz]

ic alright, when i am ready for hard 3d, i will get the metal mixing arms, blade grips, and hub. right now im running a 430L with 35A Align setup with 13t which goes around 3000 HS if am correct.