istandalone
04-05-2008, 08:38 AM
i'm selling my mx450, after upgrading to a trex 450. with it includes all servos, gyro, motor/esc, blades ect. a complete list will follow.
istandalone
04-07-2008, 04:59 PM
so below will be the pics. i can't seem to find my plethora of cnc head parts that are nib. :thinking, i had them a couple weeks ago, and thought they were in the box. oh well, i'll list the pics and a description of the nib parts that i have here now. it comes with two sets of fg 325mm blades. four futaba s3114 servos. gy240 gyro (has a small crack in it's case but works fine). also have an esky hh gyro unused if interested. brand new main/auto gears installed and only flown once. electrifly ammo 3600kv inrunner with stock 40 amp esc. carbon tail linkage. two pair used skid pipes, one used auto/main gear, one blade holder, stock canopy.
here's the in package parts list (note, on hardware parts, one or two bags may be opened a bit from stealing one screw or so):
hmxe7346 2x10 panhead screws, hmxe7344 2x5 pan head screws, hmxe8807 standoffs, hmxe7380 2.5mm eclips, hmxe7358 orings (only two pcs, head dampers), hmxe7908 crossmember, hmxe7623 ball ends (has been opened), hmxe7610 stabilizer control rod, hmxe7622 pitch links, hmxe7626 ccpm links, hmxe7356 2x4x.3mm washers, hmxe7243 2x4 pan head screws, hmxe8401 main shaft, hmxe8635 feathering spindle (one nib, one used but good), hmxe7357 alum balls (3 or 4 left), hmxe8402 main shaft collar, hmxe7801 stabilizer bar 2 pcs.
what you'll need to get it going: landing gear, as i broke the last set. likey a new tail shaft. the one that's on it slides ok, but if you've owned an mx450 before, you know the tail sucks. i'm not including a battery or rx, but if you're interested in a futaba r156 rx i can include a brand new one for an extra $40. any questions just pm me or post up. any reasonable offer considered, MAKE ME AN OFFER!!!!!
istandalone
04-11-2008, 05:57 AM
$225 shipped for everything.