lperagallo
04-07-2008, 09:41 PM
Wanted to give you guys a heads up on the new Duralite Bergen Turbine package. It now uses a 3800 mah Li-MN for the FADEC and comes with the 4300 mah High Current LI-ION for the RX. It has the High Current wiring and regulator with switch. It's a fine package, but will take a little work to install. The Li-MN battery is 5 3/4 inches long. It's still flat, but it's quite a bit longer then the LI-ION pack it replaces. I was able to mount it under the radio tray with Velcro straps. It sticks out about three inches. It clears the nose of the canopy by about an inch, so it looks OK.
The new high current regulator has heavy gauge feed with deans connector to the regulator and a Deans to two JR power feeds. This requires an additional extension to feed the RX with two power leads. I plugged one lead into the battery port of the RX and the other in AUX2 since that's a free channel on my AR7000. It is still a clean install under the frame of the Turbine, but longer an heavier wiring requires a little work to clean it up nice.
Lou
The new high current regulator has heavy gauge feed with deans connector to the regulator and a Deans to two JR power feeds. This requires an additional extension to feed the RX with two power leads. I plugged one lead into the battery port of the RX and the other in AUX2 since that's a free channel on my AR7000. It is still a clean install under the frame of the Turbine, but longer an heavier wiring requires a little work to clean it up nice.
Lou