EatMorePizza
04-07-2008, 10:01 PM
I went out today with the 400d and my mind set on inverting. I tried it before with my CPpro, but things didnt end so well. I was expecting to crash right away, but I didn't. I performed many loops holding the inverted flight longer each time. After about 7 loops I tried to bring the heli lower while inverted and SMASH! Instant lawn dart. I was sad but very happy at what I've succeded to do. I actually found it easier than I expected. Before I was trying to perform this using the cp pro with all the mods. What a waste of time that was. I was really happy how this heli responded even stock. I could only imagine with a new gyro and servos. This is all the build-up for me to perform this on my Raptor.
Crash List:
2 sets of servo gears stripped
1 tail boom
1 blade grips
1 main shaft
1 feathering shaft (but of coarse)
1 flybar
1 set of main blades
1 tail rotor shaft
I had everything in my box except for the servo gears, So easy to work with compared to my rappy. The only thing that really bothered me was that little screw and m2 nut at the bottom of the tail gear. I just wanted to share that with you guys, I hope I didnt bore you.
Crash List:
2 sets of servo gears stripped
1 tail boom
1 blade grips
1 main shaft
1 feathering shaft (but of coarse)
1 flybar
1 set of main blades
1 tail rotor shaft
I had everything in my box except for the servo gears, So easy to work with compared to my rappy. The only thing that really bothered me was that little screw and m2 nut at the bottom of the tail gear. I just wanted to share that with you guys, I hope I didnt bore you.