matthewgow
04-08-2008, 11:42 PM
Hi Everyone,
I've thought about selling my helicopter before but now I am 100% sure it is the right thing to do. I've decided to get out of the hobby for a bit. Due to the fact that I work on a boat I simply don't have enough room for all of my stuff and if I decide to change jobs its not something I can take with me easily. I'm also looking into getting my commercial helicopter pilots license. I've always been interested in flying helicopters and the other day I got to go up in a EC135 and the pilot let me fly. It was fantastic!
So here is what we are here for:
The Trex 600 is setup as follows
- Futaba 9c Super Radio, CH 21 (72.210mhz) + Charger and Bag
- 3 X Futaba S9451 High Torque Metal Gear Servos for the swash
- 1 X Futaba S9254 Tail Servo
- 1 X Futaba GY401 Gyro
- 1 X PCM 8CH. Receiver R138DP
- Align RCM-BL600 XL Motor (Serial #: E731)
- Align RCE-BL75G Speed Controller
- 11 Tooth Steel Pinion, 10 Tooth Steel Pinion (Spare)
- Align Metal Main Blade Grips
- Upgraded Metal Tail Pulleys, Metal headstopper
- Carbon Fiber Flybar Paddles
- ThunderPower TP-1010c
- ThunderPower Balancer TP-210v
- RadioShack 15 amp Power Supply
- 2 X Air Thunder 5000 mAh, 25c, 22.2v Main Batteries
- 1 X Align 1900 mAh, 12 C, 7.4v
- Eflierz Lipo Alarm (Large LED's very visible)
- 1 X Air Thunder to Thunder Power Balancer Converter
- 1 X Max Amps Lipo Fire Bag
Spares:
- Spare Tail Boom
- Spare Tail Push Rod with linkages and support guides
- Grey Dampers with copper washers
- Assortment of bearings (Tail and Tail Pulleys)
- 1 X Metal Frame Suppor
- 2 X Feather Shafts
- 1 X Main Shaft with collar
- 1 X Tail Rotor Control Arm
- 2 X Skids (Black Normal, White 3D)
- 1 X Tail Fin, 1 X Horizontal Fin
- Plastic Flybar Paddles
- Plastic Blade Grips (Beefy ones from the newer kits)
- Linkages (servo's and head)
- Main Blade Pitch Gauge and Tail Blade Pitch Gauge
- 2 Canopies (1 with stickers, 1 blanked), Set of Stickers
- Real Flight G3 Flight Simulator
- Real Flight addons, 1,4,5
- Cables for Futaba 9C to work with Real flight.
I would much rather sell the entire package as one and will only really consider partying the simulator from the package as I'm sure some people won't want it and some might want it on its own. Everything else I would like to keep together.
Price: I'm thinking $1,600 considering both batteries only have less than 10 flights on each and lots of spares, simulator etc.....
Thank you for viewing my ad!
I've thought about selling my helicopter before but now I am 100% sure it is the right thing to do. I've decided to get out of the hobby for a bit. Due to the fact that I work on a boat I simply don't have enough room for all of my stuff and if I decide to change jobs its not something I can take with me easily. I'm also looking into getting my commercial helicopter pilots license. I've always been interested in flying helicopters and the other day I got to go up in a EC135 and the pilot let me fly. It was fantastic!
So here is what we are here for:
The Trex 600 is setup as follows
- Futaba 9c Super Radio, CH 21 (72.210mhz) + Charger and Bag
- 3 X Futaba S9451 High Torque Metal Gear Servos for the swash
- 1 X Futaba S9254 Tail Servo
- 1 X Futaba GY401 Gyro
- 1 X PCM 8CH. Receiver R138DP
- Align RCM-BL600 XL Motor (Serial #: E731)
- Align RCE-BL75G Speed Controller
- 11 Tooth Steel Pinion, 10 Tooth Steel Pinion (Spare)
- Align Metal Main Blade Grips
- Upgraded Metal Tail Pulleys, Metal headstopper
- Carbon Fiber Flybar Paddles
- ThunderPower TP-1010c
- ThunderPower Balancer TP-210v
- RadioShack 15 amp Power Supply
- 2 X Air Thunder 5000 mAh, 25c, 22.2v Main Batteries
- 1 X Align 1900 mAh, 12 C, 7.4v
- Eflierz Lipo Alarm (Large LED's very visible)
- 1 X Air Thunder to Thunder Power Balancer Converter
- 1 X Max Amps Lipo Fire Bag
Spares:
- Spare Tail Boom
- Spare Tail Push Rod with linkages and support guides
- Grey Dampers with copper washers
- Assortment of bearings (Tail and Tail Pulleys)
- 1 X Metal Frame Suppor
- 2 X Feather Shafts
- 1 X Main Shaft with collar
- 1 X Tail Rotor Control Arm
- 2 X Skids (Black Normal, White 3D)
- 1 X Tail Fin, 1 X Horizontal Fin
- Plastic Flybar Paddles
- Plastic Blade Grips (Beefy ones from the newer kits)
- Linkages (servo's and head)
- Main Blade Pitch Gauge and Tail Blade Pitch Gauge
- 2 Canopies (1 with stickers, 1 blanked), Set of Stickers
- Real Flight G3 Flight Simulator
- Real Flight addons, 1,4,5
- Cables for Futaba 9C to work with Real flight.
I would much rather sell the entire package as one and will only really consider partying the simulator from the package as I'm sure some people won't want it and some might want it on its own. Everything else I would like to keep together.
Price: I'm thinking $1,600 considering both batteries only have less than 10 flights on each and lots of spares, simulator etc.....
Thank you for viewing my ad!