Charging (2) 3s together .. EAC 149 BC6 [Archive]

edkoz

04-11-2008, 08:53 PM

Before I plug this in and make sparks, is this the right setup to use with the EAC 149 and the BC6 to charge (2) 3s 1p packs at the same time?

This is the same harness I made to make a 6s 1p pack for my Trex 500.

Thanks,

Ed

RC Accessory

04-12-2008, 05:31 AM

Before I plug this in and make sparks, is this the right setup to use with the EAC 149 and the BC6 to charge (2) 3s 1p packs at the same time?

This is the same harness I made to make a 6s 1p pack for my Trex 500.

Thanks,

Ed

Correct, that is for the main discharge leads. If you got the EAC149 board from RC Accessory or anyone of my dealers, you also received the printed instructions. If you do not have them, please read them carefully here, http://www.rcaccessory.com/pdf/eac14x_instructions.pdf

edkoz

04-12-2008, 03:22 PM

I didn't have the 149 when I posted the picture of the harness. I did pick up a 149 today and your instructions were with it. Charged 2 sets today, works GREAT.

The balance taps are a little short but not that bad.

Ed

RC Accessory

04-12-2008, 03:33 PM

I didn't have the 149 when I posted the picture of the harness. I did pick up a 149 today and your instructions were with it. Charged 2 sets today, works GREAT.

The balance taps are a little short but not that bad.

Ed

We do have extensions. They do make the connections much easier.

edkoz

04-12-2008, 04:37 PM

We do have extensions. They do make the connections much easier.

Yes, I know. I just Paypal'd you for two 12 inchers.

RC Accessory

04-12-2008, 06:36 PM

Yes, I know. I just Paypal'd you for two 12 inchers.

Packed and out the door! :thumbup:

edkoz

04-12-2008, 10:43 PM

Packed and out the door! :thumbup:

Hard to beat that kind of service.