up grades for stinger 30 ??

[scottc]

ive looked around and cant find the info i want so i will just ask.
can i use the red or purple dampenrs and the driven tail hub from the raptor on my stinger 30??
if anyone knows or has done this let me know.
thanks.

[flyinfool]

Hi Scott
The raptor dampers will not fit the Stingers.
The Raptor driven tail hub will work but the Gohbee one is less money and is identical to the Raptor one.

[scottc]

where can i get the dampeners then for the stinger.thanks scott

[flyinfool]

You can get all of th eStinger parts from Gohbee.
Use the link in my sig

[scottc]

i cant find the dampeners on there site.

[flyinfool]

You can get all of the Stinger parts from Gohbee.
Use the link in my sig.

At the moment there is only the 70 duro dampers available.
We are working on some harder ones, but they are not ready yet.
I was able stiffen the stock dampers up by putting a thin 6mm washer into the head block before the damper goes in.

[scottc]

what is the difference from the rapror ones?

[flyinfool]

The damper are P/N 10121.
Here is a link http://www.gohbee.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=10121&Category_Code=1310

The shape and diameter are different. The raptor Dampers have a step and the Stingers are straight sided.
I have not yet found another that is interchangeable, but I am still looking.

You may want to get a couple of sets.
I need to replace mine about every 3 or 4 gals.

[scottc]

could a guy trim down the raptor ones with out making the hardness to hard and cause the spindels to bend, just a thought

[flyinfool]

I will have to check to see if the raptors are bigger than the Stingers.
My first thought is that the Stinger has a larger diameter than a raptor.

[scottc]

great thanks scott