7C Programming Problem

[JAMESAK51]

Hello all!!
I've got my 7c programmed to my trex and all seems well(haven't flown it yet though).The problem I'm having and I don't think it's going to hurt anything,but I'm sure isn't normal is when I flip off my throttle hold my collective pitch jumps.In normal low stick with throttle hold off my pitch is where I've got my curve set(-3 degrees).When I flip my throttle hold on my pitch goes to (-11 degrees) at low stick.
Is there something I'm missing or doing wrong? I've programmed my 6 ex and never had this issue.Any help would be greatly appreciated!!
Thank you in advance for your input!!
Jim

[BarracudaHockey]

Your 6EX defaulted to normal mode pitch curve when in throttle hold. The 7C has its own pitch curve for HOLD and you have to set it separately.

[JAMESAK51]

Thanks a million Andy!! I found it.The menu on the 7C is a bit more complex than the 6ex but I'll get it all figured out eventually.
Thanks again and happy flying!!
Jim

[redcat]

ok i got throttle hold going on both my helis.. but my beltcp starts to spool up when un-hold? is there a throttle curve or something i need to change?