Blade 400 3D tail slider not centre when blades are o pitch

[JohnAu]

Hi, i see on most setup videos they say to centre the slider on the tail shaft but mine if i centre it my tail blades are not at 0 pitch does this matter.

Thanks JohnAu.

[SeaComms]

Not only does it not matter, thats the way its supposed to be :)

At centre on the slider you should have around 8 degrees pitch, 'cause this is the average to keep the heli straight if a gyro was not installed.

[JohnAu]

Thanks SeaComms, Just wanted to make sure. i installed a gy401 and s9257 on my Blade 400 so just setting it all up.

JohnAu.

[SeaComms]

Nice one - I recommend jumping on to the Finless setup videos - covers that very nicely

[sokal]

hey johnau thier lots of good info and help on the blade 400 subforum jump on over
http://www.helifreak.com/forumdisplay.php?f=98