View Full Version : Looking for 3 sub micro servos
Hamm128
08-16-2005, 01:21 PM
I need 3 sub micro servos for a foam plane. Anybody got some?
Hotshot Charlie
08-16-2005, 02:15 PM
I got three GWS Naro's, not sure they are as small as you want. Check it out and let me know. These Naro's have been in one foamy 3DX plank and not flown a lot. In almost new condition. I bought a Ultimate foamy right after I started flying the 3DX and put HS55's in it..... so this plank pretty well set in my basement.
Hamm128
08-16-2005, 02:50 PM
The case length needs to be 21.8 mm. Thats what a futaba S-3108 is.
Let me know.
Also if it is a plain naro or HP? I need at least 15 oz torque. The standard has only 11 oz torque.
Hotshot Charlie
08-16-2005, 05:28 PM
Mine are standard Naros and are 22.1mm in case length. Sorry, I tried ! Good luck on your project !
Hamm128
08-16-2005, 06:55 PM
Thanks anyway. I broke down and ordered some at HobbyTown today. I needed some activator cause this darn glue is TOO SLOW!!!
WillJames
08-17-2005, 06:36 AM
Whatcha building?
Hamm128
08-17-2005, 09:22 AM
Flatout Flatana with a brushless himax outrunner and 1320 3 cell thunderpower lipo.