Cyclic performance

[jmiceli11]

How do I increase the cyclic rate on my Logo 600 3D with V-Bar? Do I increase the cyclic rate?

Thanks,
John

[OICU812]

Make sure your cyclic ring is large enough, max b4 binding, then on ccpm menu adjust cyclic gain to 109 min, and if you want your aileron or elevator faster then adjust those values up on the paramater page.

[dahld]

I'm going way out on a limb here, because OICU812 seldom makes a mistake :shock:. But I think the Cyclic Gain feature is in the Expert Swash menu. I sure hope I'm right, because for once I'd like it to look like I know something he doesn't :noteworthy.

Take care, Dave.

[Flybar-less]

You can also increase Proportial wich is rate. Cyclic gain has 2 components, gain (stability) and rate. Normal values for cyclic gain are 100-109. Proportional is usualy 70-90 for a high rotation rate. PSI should be 50-55 and bell 105-120 depending on how fast you want it to stop rotating, higher values for biiger batteries. Typical hiller is 20.

[OICU812]

I'm going way out on a limb here, because OICU812 seldom makes a mistake :shock:. But I think the Cyclic Gain feature is in the Expert Swash menu. I sure hope I'm right, because for once I'd like it to look like I know something he doesn't :noteworthy.

Take care, Dave.


LOL Dave you're right its on the Ex Swash Menu, I was trying to go off memory, obviously my memory is fading! :D :Bang