help

[Carpman68]

Hi all i had a little crash today after shutting the power down usual damage blades feathering shaft and the main shaft well after a quick rebuild i was checking the tracking and found that i was only getting - 8/9 deg's at low stick and the same at high stick
(now i relise why i hit the ground so hard at -8 deg's)
i cant think/figure out y i had'nt noticed this b4 as i had set low stick to -3 deg's at second last rebuild

[LockMD]

Hi all i had a little crash today after shutting the power down usual damage blades feathering shaft and the main shaft well after a quick rebuild i was checking the tracking and found that i was only getting - 8/9 deg's at low stick and the same at high stick
(now i relise why i hit the ground so hard at -8 deg's)
i cant think/figure out y i had'nt noticed this b4 as i had set low stick to -3 deg's at second last rebuild


Thats perfectly acceptable, you adjust your pitch curve in the radio to make it less negative.

[SeaComms]

Is this in flight mode 0 or 1?

[Carpman68]

in normal mode but realised i was using throttle hold to so i will check with motor unplugged

if it is the same with motor unplugged will i have to increase the throw of cyclic servo's to get +11deg's at high throttle

[sokal]

you should alway re rig the head after a crash

nutrual everthing then check your adj

i also set my throttle hold pitch curve to 0-25-50-75-100

so i can set thing without unpluging the motor
may not be the safest but it works the same