Fury extreme 90/YS91

[wingtip]

i wanted to start it at a lower price and have a reserve but friggin fleabay wanted to charge me $17 dollars for that auction... $12 of which was just for having a reserve price... so, removed that, and put the price back up...doubt it'll get any bites... Egay is such a joke.... when they first came about i could list that auction for 1 or 2 bucks... even without the reserve it cost me 5 bucks and they still get a percentage of the sale.....




http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220227323002

[MXRACERX43]

Don't forget feebay and scampal. So sick of there fees and people with no clue running up $$$ and paying more than new retail for used items. Or is it the sellers buddy bidding?

[wingtip]

Auction ended with no bids, but several emails asking what was the least i would take, i thought it was pretty clear since the minimum bid was already established...


here is a description , photos can be seen here:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220227323002

Customized Fury Extreme. This started as a fury expert before miniature aircraft even had an extreme kit. Myself and my buddies ordered 6 of these and specifically ordered them with some changes.. This helicopter has the all metal SE rotor head as you can see in the pics, NOT the plastic older style stepped axle. This helicopter also has the all metal tail case, and the all metal SE tail slider assembly as seen in the pics. This helicopter also has the aluminum fan, not the plastic stock fan. This heli also has the SE upper bearing block that houses a radial bearing and a thrust bearing. The lower bearing block is custom machined to allow the same bearing configuration as in the upper block. This heli also has the upgraded heavy duty torq tube and the extended boom... Carbon MAH blades on the mains and are 685 or 690 as i recall. Tail blades are MS composites. This helicopter also has nice bright yellow, higher ground clearance, stronger "tuff struts". Your more than welcome to price that rotor head by itself or any of the other items if you dont like the price :o)

The engine is the YS 91 with the 8.45 gear ratio. The exhaust is the great KSJ 90 sized muffler. The servo's are all futaba 9206's with a futaba 401 gyro with the 9253 on the tail. The heli also has the futaba GV-1 govenor. the reciever and transmitter ARE NOT INCLUDED!!!!!!!

This heli hasnt been crashed in 2+ years knock on wood, fly's great. The motor isnt a new one of course but still rocks out. I would estimate it only has 20-30 gallons on it.. I just dont fly it as much as my other buddies but if your in the helicopter community and know Mark Fadley he can vouge for the time on the heli and its condition and my character lol......


Since this heli has so many parts not normally found on this kit I have made flash cards with all the parts and part numbers, and also have all the rod lengths documented as well so in the event of a crash you can see exactly what parts you need and where all the rods should be exactly to get back in the air just as it was... the cards have diagrams on both sides... I may also have some spare misc parts laying around like boom supports and some misc frame parts i can throw in.....


As for other notes it probably needs some new paint on the vertical fin as its peeling a bit. Paint is house of color brand paints with clear coat but some of the clear coat has worn down and a few decals are coming off. Some of the foam that the rx and batt are in is dried up and has flakes coated everywhere but other than that theres nothing mechanically wrong period.

I do NOT ship outside the continental us.

[wingtip]

Heli is relisted..

[cudaboy_71]

not trying to lowball you or flame. but, the trick to ebay is to start with a low/no bid and no reserve. it's free market in action. i've sold $20,000 items with no reserve and a $1 start price and gotten MORE than market value. it's when greed stands in the way that you lose bids or ebay jacks you.

good luck.