T-rex 450SE V2 for sale. Bind and Fly! Night setup included!

[mudbogger2]

---SOLD----

T-rex 450SE V2 for sale. Just bind and go fly! Here is what is included:

T-rex 450SE V2 airframe
Align Carbon main blades
3- Hitec HS-65MG cyclic servos
GY-401 gyro
JR 3400G tail servo
Stock 35 amp align esc with deans connector
NEU 1107 1.5 Y/H motor
Steel 13t pinion
K&B tail blades
Trueblood dampners
Carbon tailboom
AR6100 reciever
Flightpower 2170mah EVO25 battery

The following spare parts are also included:

New painted fiberglass canopy
2- NEW sets of HS1231T Align carbon main blades
NEW HS1248T-48 head block assembly
NEW HS1215t-84 metal control arms set
1 and a 1/2 packs of spindles (3 spindles total)
2- New maingears
2- New main shafts
4- 220mm flybars and 1- 200mm flybar
New HS1124T bottom plate
2- NEW carbon tail booms
NEW HT1003T tail belt
NEW upper and lower carbon frame halfs (one side)
NEW set of Trueblodd dampners
NEW K&B tailblades
NEW HS1200T metal tail pitch assembly
New tail shaft with pulley
NEW pack of links HS1074T
1/2 of a tail servo mount
NEW 12T steel pinion
NEW 13T stel pinion
1- new paddle
1- used align carbon blades
Stock 430XL motor(very little use)
1- new landing skid
Align Carbon night blades with charger
Clear canopy with glow wire attached
Glow wire driver
glow wire string for boom
Small align metal case

The heli is a powerhouse with the NEU motor. The motor also comes down COLD after the hardest 3d flight too! The main blades have some bruises from inverted blade scrapes but they still fly perfect.
The horizontal fin has been cut off. The canopy has some cracks and a cooling hole cut out but works perfect so I never installed the new one.

Price is $700 shipped in the US. Paypal ok with a verified address.

[mudbogger2]

Willing to split this package up IF the airframe sells first!

Prices do not include shipping.

T-rex 450SE V2 airframe $220
Align Carbon main blades $10
3- Hitec HS-65MG cyclic servos $50
GY-401 gyro $90
JR 3400G tail servo $50
Stock 35 amp align esc with deans connector $20
NEU 1107 1.5 Y/H motor $100
Steel 13t pinion (Selling with motor)
K&B tail blades (selling with airframe)
Trueblood dampners (selling with airframe)
Carbon tailboom (selling with airframe)
AR6100 reciever $30

Spare parts and night flying setup $150.

[mudbogger2]

$675 shipped for the entire package!

[Cory101]

are the main blades you are selling the white align carbon blades?

[mudbogger2]

are the main blades you are selling the white align carbon blades?
Yes. They are the ones pictured on the heli. I will only sell them separate if the airframe sells first.

[mudbogger2]

$650 shipped for everything.

[heli_bernard]

Let me know how much you want for the whole main frame set:
-main frame (upper and lower)
-motor mount
-battery holder
-main gear
-etc etc


Also just to verify this is the V2 frame and its black?

[mudbogger2]

T-rex 450SE V2 airframe $220 Price for the airframe.

I am not splitting up the spare parts.

[Mr.Maim]

PM sent.

[mudbogger2]

Sale pending

[Mr.Maim]

SOLD! :) :) :) :)

Heli arrived on Friday, picked it up from the P.O. today...

ABSOLUTELY AWESOME!!

The heli is in excellent condition, mudbogger2 takes very good care of his equipment! Thanks so much for a great deal, good communication, fast shipping, and an overall excellent buying experience for me here on the HeliFreak.com forums! You're a great asset to this community! :noteworthy

Thanks again,

Mr.Maim