Which You Chose?---WFT09 Or WFT08

[Leo Hu]

I want to have a research for preparing for the stock of WFLY Radios on my online shop.

------According to the prices,the specifications and features,

WFT09 or WFT08,which one did you choose or will you choose?:confused:

Hope for your suggestions and much thanks for your attention!:lol:


Regards

Leo

[Leo Hu]

8 Channels transmitter

According to my research,the market price of it is about USD$160---USD$185

Specification and features

1. Model: WFT08

2. Use in: airplane, helicopter, car and boat

3.Band: 35 MHz, 36MHz, 40 MHz, 41 MHz, 72 MHz

4. Output:≤750mW

5. Current drain: ≤300mA

6. Output pulse: 1000μs-2000μs

7.Modulation: PPM/PCM

8.RF module: individual

9. Power:1.2v×8 (9.6v) Ni-cad/Ni-MH rechargeable batteries

1.5v×8(12v) normal alkalescence batteries

10.Dual rate range: 0%-120%

11.Mix: PROG. NOR. MIX (5 series) PROG.CUR.MIX (2Series)

12.Reverse switch: Ch 1 aileron, Ch 2 elevator, Ch 3 throttle, Ch 4 rudder, Ch 5 Landing Gear, Ch 6 Flap/pitch, Aux 1, Aux 2

13.Low Voltage warning: battery voltage≤8.2v, buzzer buzzes

14.132×64 dots FSTN LCD, Multi-language and Graphical Interfaces Display.

15. PPM/PCM (WFLY specified PCM, only WFLY receiver applied.).

16. Transmitter can be applied to Futaba and JR receiver. Dual conversion receiver (PPM) can be applied to Futaba and JR transmitter.

17.Support Airplane, boat, car and Helicopter.

18. 8-model memory storage.

19. High precision, 32 figures data processing, data display with four effective figures.

20.With at most 8 dots throttle curve and 10 pitch curve.

21. Trainer function/data transfer/simulator jack



TRANSMITTER
MODEL NO.: WFT08
●Band: 35 MHz
●Output:≤750mW
●Current drain: ≤300mA
●Output pulse: 1000μs-2000μs
●Modulation: PPM/PCM
●RF module: individual
●Power:1.2v×8 (9.6v) Ni-cad/Ni-MH rechargeable batteries
1.5v×8(12v) normal alkalescence batteries


Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order.

RECEIVER

WFR09-C 9 Channels Dual Conversion Receiver (PCM)
Power supply: 4.8V
Current drain: 9.5mA
Weight: 19g
Size: 44.88mm x 27.90mm x 16.39mm



Includes:
1 x transmitter,

1 x RF module,

1 x transmitter battery holder,

1 x neck strap,
1 x simulator adaptor,
1 x PCM receiver

[Leo Hu]

9 Channels transmitter

According to my research,the market price of it is about USD$230---USD$250

Specification and features

1. Model: WFT09

2. Use in: airplane, helicopter, car, glider and boat

3.Band: 35 MHz, 36MHz, 40 MHz, 41 MHz, 72 MHz

4. Output:≤750mW

5. Current drain: ≤300mA

6. Output pulse: 1000μs-2000μs

7.Modulation: PPM/PCM

8.RF module: individual

9. Power:1.2v×8 (9.6v) Ni-cad/Ni-MH rechargeable batteries

1.5v×8(12v) normal alkalescence batteries

10.Dual rate range: 0%-120%

11.Mix: PROG. NOR. MIX (7 series) PROG.CUR.MIX (4 Series)

12.Reverse switch: Ch 1 aileron, Ch 2 elevator, Ch 3 throttle, Ch 4 rudder, Ch 6 Flap/pitch, Aux 1, Aux 2, Aux 3

13.Low Voltage warning: battery voltage≤8.2v, LED glitters and buzzer buzzes

14.132×64 dots FSTN LCD, Multi-language and Graphical Interfaces Display.

15. PPM/PCM (WFLY specified PCM, only WFLY receiver applied.).

16. Transmitter can be applied to Futaba and JR receiver. Dual conversion receiver (PPM) can be applied to Futaba and JR transmitter.

17.Support Airplane, boat, car, glider and Helicopter.

18.10-model memory storage.

19. High precision, 32 figures data processing, data display with four effective figures.

20.With at most 8 dots throttle curve and 10 pitch curve.

21. Trainer function/data transfer/simulator jack

Includes:
1 x transmitter
1 x RF module
1 x transmitter battery holder
1 x receiver battery holder
1 x neck strap
1 x trainer cable/data transfer cable
1 x simulator cable
1 x PPM receiver
1 x PCM receiver
1 x switch harness