futaba 9chp super setup

[malleeman]

Ok I bought a used raptor 50v2 and was wondering what is a common set up for pitch, collective, throttle curves and any other setting i need to know for the futaba 9chp super as im new to heli first buy. this also has a throttle gov from model avonics on it so looking for settings also on that. also what are the settings to setup throttle cut. i bassically want to tune the 9chp super tx up and any fine tuning can be done later with a bit of flying time.want to get out and fly only way to learn aaaaaaaa
thanks for any help.:lol:

[BarracudaHockey]

http://www.raptortechnique.com should get you well on your way. If you have any specific questions feel free to ask.

[mrthomasfritz]

Ok I bought a used raptor 50v2 and was wondering what is a common set up for pitch, collective, throttle curves and any other setting i need to know for the futaba 9chp super as im new to heli first buy. this also has a throttle gov from model avonics on it so looking for settings also on that. also what are the settings to setup throttle cut. i bassically want to tune the 9chp super tx up and any fine tuning can be done later with a bit of flying time.want to get out and fly only way to learn aaaaaaaa
thanks for any help.:lol:
Careful about the 9c super, looks like Futaba does not see it in the future. They are pushing the 8 channel modules for the 9 channel radios.

[BarracudaHockey]

There's a simple reason for that. The 9C is only 9 channels in PCM mode. To interface with a module, any module whether its Futaba, Spectrum, X-link, whatever, has to run in PPM mode, and in PPM mode you only get 8 channels.

The 9th channel is only on/off, there's no end points, you can't mix to or from it or anything, about the only thing you can do is reverse it.

[malleeman]

THANKS FOR ALL YOUR INPUT FELLAS++++++++++++