View Full Version : JR to Futaba
diyman
08-20-2005, 04:39 PM
Hi,I have a JR Propo X-378 transmitter.Would the transmitter work with Futaba servo's and receiver.
I use the transmitter with my shuttle on PPM.which has all JR radio gear.
The reason i ask is I'm looking at buying a second hand Raptor 50 and some that Ive seen have Futaba radio gear in.
Thanks.
tapeworm321
08-20-2005, 04:59 PM
It will work with the servos but you will need a new receiver.
kthane
08-21-2005, 01:13 AM
Don't think this is true for his band. Notice his location. I think they use 35MHz in England and there is no positive/negative shift receivers. diyman, I would highly suggest you check with the locals.
DavidH
08-21-2005, 09:25 AM
Diyman,
As kthane said above. There is no shift in the within the band. So you should be able to use your JR transmitter to drive the Futaba reciever as long as they are on the same channel. This should be the case in the UK only.
David
tapeworm321
08-21-2005, 09:39 AM
Notice his location.
Opps I should have looked there before I posted opps. :oops:
jimngu
09-17-2005, 02:40 AM
Hi Folk's !
Just want to find if the jr can link to futaba using the trainer cord :?:
Mille aka Fredrik
09-21-2005, 01:17 PM
So you should be able to use your JR transmitter to drive the Futaba reciever as long as they are on the same channel. This should be the case in the UK only.
As long that is PPM mode on the reciver. If it's PCM, it will not work.
/Fred