what do you think about this setup?

[LoveMyTrex]

my setup on a 600 would be

600NSP
8717s
spartan 760
8900G
ar7100R
switch glow
carbsmart
TST 600 V's
super stubz
V tails
TT .53 redline
FP 2s 2500
running the 8717s at 8V
what do you think?

[stg099]

I think it's going to be a bad-ass 600NSP

[LoveMyTrex]

:YeaBaby: thats what I am hoping for

[nwolsink]

I would go for this setup:

600NSP
BLS451 on cyclic
S3155 on throttle with servo adapter plate
Spartan DS760 / BLS251
AR7100R > I suggest you try the Align gov 1st it is really good!
Align 2 in 1
Radix 600 mains with Super Stubz
V tails or Radix tails
TT .53 redline / MP5
FP 2s 1600mah

[TheBum]

Add a CarbSmart for optimum power. You'll also need a micro servo and the servo bracket to go with it.

[LoveMyTrex]

I would go for this setup:

600NSP
BLS451 on cyclic
S3155 on throttle with servo adapter plate
Spartan DS760 / BLS251
AR7100R > I suggest you try the Align gov 1st it is really good!
Align 2 in 1
Radix 600 mains with Super Stubz
V tails or Radix tails
TT .53 redline / MP5
FP 2s 1600mah
_______________

well you obviously prefer futaba, I am going to use the faster and higher torque JRs.

and yeah I am planing on using a carbsmart aswell forgot to add that

[BJH]

looks crappy. Send i to me !:D

Nice set-up man!:)

[LoveMyTrex]

don't have it yet, but that is what I am thinking. the only thing I have so far is the spartan. the super pro is out of stock at my LHS which is sponsoring me so have to wait for that, then need money for the rest, and of course wait for the 7100r to come out.

I am thinking go to the 700 first, but don't know if I can afford fuel for a 90 though. but I think I would enjoy flying that more.

I would use this setup on a 700

700CF
8717s
spartan 760
8900G
ar7100R
switch glow
carbsmart
TST 690 V's
super stubz
V tails
TT 1.06 unless thats illegal for competition then I will use YS .91
FP 2s 2500
running 8717s at 8V

this would cost me about 300$ more, but almost twice as much for fuel. think I will have to talk to my sponsor.

[sparky]

Get an Arizona Regulator or anyone that is programable. With the 8717's and the Align regulator, you will have problems. The Align is limited to 6 amps, and thats not enough.
You are close to what I want. But I prefer the ATG and Solid G setup, YS/Hitori, and Raddix. The rest is pretty much what I am ordering when I get back from vacation.

[LoveMyTrex]

I will not be using a reg, I will be plugging my 2s lipo directly into the large gage wiring on the ar7100r, and running my 8717s at 8v. will be using a switch glow to power glow plug.

[fury]

Add a CarbSmart for optimum power. You'll also need a micro servo and the servo bracket to go with it.

I believe the Super Pro comes with this bracket.

[TheBum]

I believe the Super Pro comes with this bracket.

I see from Align's website that you are indeed correct. I'm not sure why they'd throw both of the specialty brackets in the kit in addition to the regular stiffener, but they did.

[LoveMyTrex]

I dono but I will be using both the servo mount and the switch mount.

[TheBum]

I dono but I will be using both the servo mount and the switch mount.
I'm curious as to what anyone with the Super Pro would use the switch bracket for? It's impractical for the Align 2-in-1's switch unless you want to loosen the canopy or reach up through the nose of the canopy every time you want to use the 2-in-1's glow starter.

[LoveMyTrex]

I am going to use this:

http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMAR7100R

not the align 2in1, I will be plugging a 2cell lipo directly into the large gage wiring coming out of the ar7100R, and running unregulated 8v to my servos. the 7100R uses a switch, therefore I need a switch mount.

I will be using a switch glow to substitute the built in glow driver

[LoveMyTrex]

so anyone see any flaws in my 8v setup?