shogun help....

[dudeman]

I have a lil problem w/my shogun, not shure if the setup is not right or what.
First of all, the tail rotor is not very stable when trying to hover, second, as i add power for lift off, tail wants to torque around a bit making it a bit rough to fly. :arggg:
Maybe the setup is wrong as i am using a hitec eclips 7 radio, it is kinda hard to understand the setup procedures of the transmitter.
any help or suggestions would be very apreciated.
Thanx

[gitmesteak]

you want to make sure you dont have too much pitch. if you do you tail rotor is goin to go nuts. so you maybe want to lift off at 3 degrees. with the motor runnin at 2500 rpms. the fater the motor runs the more stable the heli will be.

[dean masters]

Easy bro sound like a pain in the ass i think you need to do some hard reading of your tranny book you need to get the mixin correct .throtle to collective and collective to tail. o and wot gyro you got has it got heading hold. hope it helps dean :noteworthy

[spin-up]

If its spining around try switching your gyro 180 degrees, also make sure you have a good one, like Futaba Gy401, with head lock. I've gone through 3 different makes and found the Futaba to be the best.
Also make sure you have zero pitch at half throttle too. :smokin: