View Full Version : gyro 401 770 5000
northertunder
04-29-2008, 11:05 PM
well on to next change which gyro servo combination do you suggest and why. and after adding the 285mg's and the gyro and gyro servo combination is there anything i need to do or add. Thanks again guys
LockMD
04-29-2008, 11:11 PM
well on to next change which gyro servo combination do you suggest and why. and after adding the 285mg's and the gyro and gyro servo combination is there anything i need to do or add. Thanks again guys
GY401 - 3400G mounted on the boom and your done, as far as I can tell thats all I have done so far (for better performance anyhow) other things I have done were for looks and what not.
skigolfmike
04-30-2008, 07:00 AM
As good as the 401 is the 770 is a better gyro. I'd recommend the 3400G or 3500G servo. ReadyHeli has the 770/3500G combo available.
Ti RX-8
04-30-2008, 11:33 AM
As good as the 401 is the 770 is a better gyro. I'd recommend the 3400G or 3500G servo. ReadyHeli has the 770/3500G combo available.
Can the 3500G run at 6V? From reading the info, I can't tell. They give 6V specs for the 3400G, but not the 3500G.
skigolfmike
04-30-2008, 12:39 PM
The 3500G can run at 6V. 3400G great, 3500G better.
Ti RX-8
04-30-2008, 04:28 PM
The 3500G can run at 6V. 3400G great, 3500G better.
Sweet! :thumbup::woot
I think that may be the one. Thanks.
JEEPWORLD2002
04-30-2008, 04:51 PM
770/3500g :YeaBaby:
northertunder
04-30-2008, 06:31 PM
i have a 9257 and 401 already would that be a good combination Thanks
jayrat
04-30-2008, 09:54 PM
[QUOTE=northertunder;654508]well on to next change which gyro servo combination do you suggest and why. and after adding the 285mg's and the gyro and gyro servo combination is there anything i need to do or add. Thanks again guys
I've installed the 285's but no gyro or tail servo yet. I believe you should install a bec with your new gyro and servo? Someone with more experience should chime in soon to clarify.
skigolfmike
04-30-2008, 10:09 PM
Yes, add a BEC or risk thermal shutdowns.