ChuckTSeeker
04-30-2008, 02:43 AM
well after having a bit of trouble getting my heli to hover, which caused a minor heavy tail end landing that stripped a servo and bent my tail boom, i finally hovered my heli today :smokin:
i knew i was ready to hover over a week ago, plenty of sim time and been through the Rudds instructions, but every time i got the heli just off the ground it kept coming back at me and to the left, in my limited space out back i kept just landing it, but after having no luck i thought i would go to the park with a bit more space and see if i could get it back as being a newb i still thought it was my lousy flying, as it did say it flies out of the box :DOH my first mistake :shock:
well after replacing the boom and servos, then setting the swash myself, today was the day to get out back and make sure i had put it all back together ok, it was blowing a bit of wind but i thought im only making sure everything is right so i went ahead with my test :thumbup:
spooled up and it was all sweet, tried all the controls and everything seemed ok, so thought bugger it, went in got the training gear fitted and went back out for a try, well bugger me if the heli just didn't lift of the ground and with a little bit of input i was hovering :happyd not pretty but i was off the ground and doing it :fly
YIPPEEE!
moral of story the E-Flight Blade 400 doesn't always fly ok straight out of the box :P
thanks to all who helped me get to where i am now, this site rocks :noteworthy:noteworthy
cheers chuck
PS battery is on charge, i'll be out the back again in an hour :YeaBaby:
i knew i was ready to hover over a week ago, plenty of sim time and been through the Rudds instructions, but every time i got the heli just off the ground it kept coming back at me and to the left, in my limited space out back i kept just landing it, but after having no luck i thought i would go to the park with a bit more space and see if i could get it back as being a newb i still thought it was my lousy flying, as it did say it flies out of the box :DOH my first mistake :shock:
well after replacing the boom and servos, then setting the swash myself, today was the day to get out back and make sure i had put it all back together ok, it was blowing a bit of wind but i thought im only making sure everything is right so i went ahead with my test :thumbup:
spooled up and it was all sweet, tried all the controls and everything seemed ok, so thought bugger it, went in got the training gear fitted and went back out for a try, well bugger me if the heli just didn't lift of the ground and with a little bit of input i was hovering :happyd not pretty but i was off the ground and doing it :fly
YIPPEEE!
moral of story the E-Flight Blade 400 doesn't always fly ok straight out of the box :P
thanks to all who helped me get to where i am now, this site rocks :noteworthy:noteworthy
cheers chuck
PS battery is on charge, i'll be out the back again in an hour :YeaBaby: