Futaba 3153 on H200SD swash ?

[urbasik]

Hi Helifreaks,
I´m Frank from Germany and new to HeliFreak.

I´ve just orderd the 200 SD Combo from Flying Hobby.
Have got 3x3153 here and i wonder if they are better on cyclic as the 306 BB and if they will fit.

My Setup:

H 200 SD
Z-Power 5150 KV with Gaui 12 A ESC
2S 800
LTG 2100 with LTS 3100 on Tail (maybe i´ll try the deliverd 401 with 3154)
Futaba R 617 Fasst

any problems or do you think it´s OK

thx
Frank

[mrivers]

I won't fit. You might be able to grind some of the CF away to make it fit, it appears to be less than 1mm too wide.

[urbasik]

OK. If it makes sense and these servos are a good choice
i could dremel a little cf away.

mayn thanx

[Campbellsky]

The stock Gaui 12A ESC may not be sufficient to cover the additional 3 digital servos 3153 to be used for cyclic. You may need to add a separated BEC.

[rotorhead58d]

The stock Gaui 12A ESC may not be sufficient to cover the additional 3 digital servos 3153 to be used for cyclic. You may need to add a separated BEC.

someone should do the math on this. i suck at math

[urbasik]

Yes i already have HS 45 here and try them first.

HS 45 on cyclic should be the best choice at the moment.

Regards Frank