Help with Hurricane 550 and DX7

[PEZ]

I am very new to choppers and may be out of my depth but if some one can help it would be greatfuly apreciated. I have purchased a Hurricane 550 with DX7 transmitter. All servos are digital and the chopper has fatuba 401 Gyro. The dx7 has been binded to the Hurricane but all programs in the dx7 is set up for 3D flight. Can some guide me through the DX7 program so I can fly the chopper easier with no 3D programs. All I want to do is fly the chopper with HH Gyro and no fast moves.
Any help would be apreciated.
Thanks
PEZ

[spencer737]

here dude hope this helps :D

http://www.helifreak.com/showthread.php?t=28681

[Mikej]

I think that your normal throttle curve and pitch curve should still be OK - can youtell us what they are ?.

Cheers,
Mike.

[mjdee14]

There are many Freaks posting from Oz....maybe you could hook up with one of the Hurri flyers and get some help.

The radios are not set up with 3D programs. If you bought it already set up by a 3D flyer then your rates and controls might be touchy and you need some Expo and dial down some other parameters.

Do you have the manual and have you read it?

If so post all your throttle and pitch curves and I'm sure you will get several replies.

[kgfly]

If you want to find some local help look here archeli (http://www.archeli.com.au/cobra)