Li-Ion TP1010

[dacostad]

Can you charge Duralite Li-Ion batteries on a TP1010 with firmare 2.3a? I cannot find any mention in the manual.


Thanks


David

[RC Accessory]

Can you charge Duralite Li-Ion batteries on a TP1010 with firmare 2.3a? I cannot find any mention in the manual.


Thanks


David

Yes, charge as lipoly.

[odieser]

Why not charge using the LI-ION setting on the TP-1010?

[dacostad]

Hi,

because there is no Li-ion setting on the TP1010.

David

[jimheliboy]

Hi,

because there is no Li-ion setting on the TP1010.

David

Sender: "Warranty" <warranty@thunderpower-batteries.com>
Subject: RE: TP 1010C
Date: Mon, 25 Jun 2007 12:10:22 -0700
Below is what the Thunder power tech emailed me:

Greetings,

I did so checking, for the li-on setting it will only charge at 100% at 4.1
per cell, once you select li-on in the charging menu, just select cell count
and charging amperage and then push the enter button, I have noticed one
mistake and that is after selecting li-on on the charging screen it still
says li-poly when you push the enter button, but it charges at 4.1v per
cell.

Thank you,



THUNDER POWER WARRANTY DEPARTMENT
4720 W. University Ave., Las Vegas, NV 89103
Phone: (702) 228-8883 Fax: (702) 228-8885
Warranty@thunderpower-batteries.com
<mailto:Warranty@thunderpower-batteries.com>









-----Original Message-----

Sent: Saturday, June 23, 2007 11:22 AM
To: Warranty
Subject: Re: TP 1010C



What choices? and isn't it supposed to go into charge mode by pushing
charge/sel
button. How low does it charge the lipro? Is it automatic shut off when the
battery is fully charged? How much current does it send to the lipro...Maybe
I
am just dense....I am not trusting this charger to be preforming as it
should.
I am now learey to charge my lipo batteries as well. The operational manual
has
a whole lot to be desired. Not updated as I would think it should be. Maybe
I
am crying wolf and it is working fine. Just don't want to trash a battery or
burn up my neighborhood. I am buying a class "D" fire extingusher for sure
now.
Thanks Jim

On Wed, 13 Jun 2007 16:08:34 -0700
"Warranty" <warranty@thunderpower-batteries.com> wrote:
> Greetings,
>
> You need go to the charging menu by momentarily holding the sel button and
> the use the + and - buttons to make your choices.
>
> Thank you,
>
>
>
> THUNDER POWER WARRANTY DEPARTMENT
> 4720 W. University Ave., Las Vegas, NV 89103
> Phone: (702) 228-8883 Fax: (702) 228-8885
> Warranty@thunderpower-batteries.com
> <mailto:Warranty@thunderpower-batteries.com>

[dacostad]

Unless I am missing something I see no Li-ion option on firmware 2.4, it has Lipo, Nicd, NiMh, A123, and lead acid.

David