BCX2 lower blade tracking

[jayhoskins]

Crashed my blade today and noticed alot of shaking when I tried the throttle again after. Seems to be the lower blade's tracking is off, is this a swash problem or what? only had it for a few days and I'm a beginner to all this!?

[jrohland]

The blades pivot on a couple pins that stick out the side of the lower hub. I would make sure you have not broken one of those pins. They break easily. Many of us replace the upper and lower hubs with the metal ones just because those pins keep failing on the plastic hubs.

jrohland

[jayhoskins]

Yeah I checked that, everything seems to be alright, I read through everything I could find on here during my nightshift at work and seem to have fixed the problem somewhat. Thanks for the help, don't know where some of us would be without these forums!

[BigAl07]

You could have a slightly bent/warped innder shaft or even a slightly deformed blade. I would change out the blades with a new pair and see if it helps. I've had brand new blades be "off" and cause a wobble.

[jayhoskins]

Yeah it may be the inner shaft, I'm going to try that. It flies now with some tweaking but you can still see vibration when it's getting up to speed. Thanks