Problem with my elevator Trex 600

[julitostar]

Need help , I just assemble my Trex 600 and program the dx6 remote ... when I push the right stick to the front the heli will go back . I tried to reversed the elevator channel but then when I push the right stik to the front it will work as Pitch.... and the left stik will work as elevator and aleron....

Other problem when I move the aleron channel fast one of the push rods will get lose ....

Thank's for the help......

Julito

[Skiddz]

CCPM basics.

1st step. Get all the swash servos moving in the same direction. They should all either move up or down together when you move the left stick. Use servo reversing to do so. Once you've got them all moving the right direction, you're done with servo reversing for the head. DO NOT go back there.

Now, to get the swash moving in the proper direction, use the SWASH menu. If the swash moves up with the collective stick, you're good. If it moves opposite the stick, change the PIT value to it's opposite. If it says +50%, change it to -50%.

Do the same with AIL and ELE. Move the cyclic back and forth. The swash should tilt forward when you move the stick forward. If it's opposite, change the ELE value in the SWASH menu.


AIL is the same way. Right stick, swash tilts right etc...

Once you've got that done, set up the head.

[julitostar]

Thank's you did my weekend..... I will work with the problem and let you know... but now my BEC is not working and is new... oh is not my day..