rhampton
05-04-2008, 09:00 PM
I'm sad to part with my 30 Size Esmart 600..This is the smoothest Floating Device out there and can do some amazing 3d...Well here is what you will Receive & my price is $625.00
1. Esmart 600 Kit with Motor, Blades and Canopy
2. Extra set of blades new in box ( 520mm )
3. 2 custom Canopies ( so 3 canopies alltogether )
4. New Spindle
5. New Shaft
6. New Flybar
7. New Tail Boom and New Tail Belt
8. Upgraded Metal Control Arm
9. 2 5s 3700mAh Lipo Flightpower Evos
10. Raptor 50 Landing Skids already on Heli and the Original Landing Skids New. I will include the Noodles and leave them on the landing skids. It really helps for beginners and it looks pretty Kool i must say..if you decide you dont want them, just take them off...It's just foam.....
11. JR G500T Gyro with Jr New 810 G Tail Servo ( equivilant to a 401 Gyro but better )
13. Electron 6 channel FM receiver...Works perfect..Just as good as 2.4Ghz..I never had any glitches Flying with this Fm receiver..
14. New Electrifly 60A Esc..This is also a newer Esc With a HUGE Heat sink and it never get's Hot.
15. Electrifly Equinox Balancer with extra new cables for 3s and 5s lipos..
16. Bigger Tail Fin
17. New set of Linkages for the Whole Heli and
18. Pitch Gauge for Blades.
19. Manual for Esmart 600
Heli is all built and no crashes what so ever..I only hovered it since i'm sort of still a beginner. Never did any forward Flights yet or any 3d..Just smooth Hovering...i put the bigger Canopy on..Those 2 Custom Canopies are Generic 30 size Canopies so i had to make them Fit...i realize u have to be a little creative in this hobby..
Basically everything is there for u..All the electronics are there...Just add your Transmitter and Fly. It's a Fully loaded Heli RTF..The Lipo Batteries has always been balanced thru my Charger and works incredibly great..i get like 7 minutes..The Heli is light and sooooooo smooth..You wont believe how smooth this is and parts are really inexpensive...Blades $14, Shart $4,,etc....and it's a 30 size Heli with 520mm Blades on it. It's pretty Big and the way i have it, it looks no different than a 50size Raptor 50...Yes it's actually no difference in size...with the bigger Canopy i have on there and the Raptor 50 Landing Skids, it looks a lot bigger and still Flies Perfect..I will take the canopy off for shipping and the Tail Boom..Tail boom has it's on mechanisms..has a Gear built in and casing,,So there's no need to try and wrap the belt around the Main Gear...I really like that Design,,Just push the Tail Boom in and tighten..That's it...All the linkages are already even..
Any questions, please feel free to email me at rhampton1914@gmail.com, or PM me here or call me @ 727-481-9872
This is a better deal than a Trex 600..It's newer and better design, especially for the battery tray,,,,so much room for electronics..They really did a good desing on this Heli and it's powerful yet Smooth..
I take PayPal, Money order, or Check...
Reggie
1. Esmart 600 Kit with Motor, Blades and Canopy
2. Extra set of blades new in box ( 520mm )
3. 2 custom Canopies ( so 3 canopies alltogether )
4. New Spindle
5. New Shaft
6. New Flybar
7. New Tail Boom and New Tail Belt
8. Upgraded Metal Control Arm
9. 2 5s 3700mAh Lipo Flightpower Evos
10. Raptor 50 Landing Skids already on Heli and the Original Landing Skids New. I will include the Noodles and leave them on the landing skids. It really helps for beginners and it looks pretty Kool i must say..if you decide you dont want them, just take them off...It's just foam.....
11. JR G500T Gyro with Jr New 810 G Tail Servo ( equivilant to a 401 Gyro but better )
13. Electron 6 channel FM receiver...Works perfect..Just as good as 2.4Ghz..I never had any glitches Flying with this Fm receiver..
14. New Electrifly 60A Esc..This is also a newer Esc With a HUGE Heat sink and it never get's Hot.
15. Electrifly Equinox Balancer with extra new cables for 3s and 5s lipos..
16. Bigger Tail Fin
17. New set of Linkages for the Whole Heli and
18. Pitch Gauge for Blades.
19. Manual for Esmart 600
Heli is all built and no crashes what so ever..I only hovered it since i'm sort of still a beginner. Never did any forward Flights yet or any 3d..Just smooth Hovering...i put the bigger Canopy on..Those 2 Custom Canopies are Generic 30 size Canopies so i had to make them Fit...i realize u have to be a little creative in this hobby..
Basically everything is there for u..All the electronics are there...Just add your Transmitter and Fly. It's a Fully loaded Heli RTF..The Lipo Batteries has always been balanced thru my Charger and works incredibly great..i get like 7 minutes..The Heli is light and sooooooo smooth..You wont believe how smooth this is and parts are really inexpensive...Blades $14, Shart $4,,etc....and it's a 30 size Heli with 520mm Blades on it. It's pretty Big and the way i have it, it looks no different than a 50size Raptor 50...Yes it's actually no difference in size...with the bigger Canopy i have on there and the Raptor 50 Landing Skids, it looks a lot bigger and still Flies Perfect..I will take the canopy off for shipping and the Tail Boom..Tail boom has it's on mechanisms..has a Gear built in and casing,,So there's no need to try and wrap the belt around the Main Gear...I really like that Design,,Just push the Tail Boom in and tighten..That's it...All the linkages are already even..
Any questions, please feel free to email me at rhampton1914@gmail.com, or PM me here or call me @ 727-481-9872
This is a better deal than a Trex 600..It's newer and better design, especially for the battery tray,,,,so much room for electronics..They really did a good desing on this Heli and it's powerful yet Smooth..
I take PayPal, Money order, or Check...
Reggie