PDA

View Full Version : ccpm set up


steve1
05-05-2008, 11:37 AM
Hi Guy

Just watch finless video on setting up ccpm

man what a brain freeze got most thing sorted but have one problem
when i push the throttle forwards all three srevo's go up
an when i pull the throttle stick down ther all go down (this is right)
when i move the aileron stick to the right the ailron servo goes down and the pitch servo goes up
and oppersite for when i go left (this is right)
now this is where i have the problem
when i pull the elevater stick down the elevater servo goes down and the aileron servo goes up but the pitch servo dose not move
when i push the elevator stick forward the elevater servo goes up and the aileron servo gose down but the pich servo dose not move
iam useing futaba ff9 super and the swash is set on sr3
iam tring to set up a skyfox mechanic

hope this is clear
cheers steve

hookmaker
05-16-2008, 05:57 PM
Hey man, wrong setup. Best way to fix (and learn) is to watch Finless setup servos in the T-Rex 500 build thread.

I believe # 8 is the one where he shows the one-and-only method:'
http://video.helifreak.com/?subpath=finless/trex500&filename=step8.wmv
/Henrik