HELP !!!!!! Setup 9303 flash align gov

[bighands3d]

How do I set up 9303 for multi head speed setting ? What program mix or aux channels or settings do I need to use to make this work ?

[sonofcar]

Act your gov menu. and set the percent per each flight mode(nor,1,2,3,4,) using that menu. Then read the manual on the align gov, and at the bottom there is a section on percent to headspeed for dx7 which should be close to the 9303. final adjustment will need a tach and a friend(makes it easy) to get the headspeeds spot on. On act the gov menu and what channel you plug it in to, i am not sure havent done it with mine. It will probaly be aux 3. and then go to the asighment meuu. Like i said just guessing havent done it. I run the mutli gov, but that should be close. Check the radio book.

[sparky]

I am pretty sure its Aux 2. Aux 3, channel 7 is gyro. You activate it in either list or Main menue. Sorry, but forgot witch. After you activate it, then you will see it below the Aux 2.

[sonofcar]

Its cant be aux 2 the 9303 is locked on aux 2 for gyro. Ok I checked the book and its works off of the gear channel 5. go to the sytem mode on the main screen and set the gear channel to gov and activate it. done your be good to go.:thumbup: