BeltCP.co.uk getting there!

[psilo]

Guys,

I have added some more stock and put a slightly better site up (still not finished). I am going to be adding some guides etc. I will still be deploying a totally new site with better cart/checkout (allowing postage by weight/country etc) soon, but it is taking me longer than hoped!

I was wondering whether you guys mind me using your info from here (credited to you of course!), in particular was thinking of Ber60's videos but need to get setup guides up too.

Let me know your thoughts.

Thanks

Gerd

[kitenutuk]

much better than it was looking last week :-) will have to be ordering some spares soon keep up the great work

[Jonnyheli]

Your site is looking much better! More professinoal etc. I am tempted to buy those gorillar paddles! Are they good? Do they fit the esky stock flybar or will I need to buy it seperate? And is there any mods I have to make to fit them?

Again nice site. I will definatly be buying stuff from you (When I get money).

Cheers,
Jonny

[DierWolf]

I'm trying to load the shop page and it has yet to show up.

[helihathnofury]

How about doing a deal on those magic EXI frames from Xheli @ $99 a throw!!!!
LOL!!!

Gerd, site gets better and better!!!!!!!

Mike

:thumbup:

[Ber60]

Hi Gerd

Feel free to use my video's
This is what I used as guide for my cnc setup
http://www.buzzflyer.co.uk/ESKY-CNC-Alloy-Head-Build-Guide.asp
http://www.buzzflyer.co.uk/Belt-CP-CNC-Alloy-Tail-Assembly-Guide.asp

Erwin

[DierWolf]

Glad you can see it all i get is the first page, only other link that works is the FAQ page.

[psilo]

Erwin,

Thanks, I will of course credit you and helifreak when I put them up.

Hopefully have the bulk of it completed tomorrow, then just need to work on the new site/cart so I can calculate postage properly!

[DierWolf]

Ok got it open by using the Shop link at teh bottom of the main page.


Just a heads up... you have Align pinions on sale, make sure to put a note to them that these will NOT fit on the Belt CP stock motor as that is 2.3mm shaft while align pinions are 3.17mm shafts.

[Jonnyheli]

If you want to make money on this website you should think about advertising it. It will cost you to put your advertisments on different websites but it will attract more people and other shops etc will pay you to have their advertisment on your website.. Just a thought... I mean... you can make money just off advertisments...

-Jonny

[psilo]

Glad you can see it all i get is the first page, only other link that works is the FAQ page.
Anyone else got this problem?

Wolfie, what browser you using?

[psilo]

Your site is looking much better! More professinoal etc. I am tempted to buy those gorillar paddles! Are they good? Do they fit the esky stock flybar or will I need to buy it seperate? And is there any mods I have to make to fit them?

Again nice site. I will definatly be buying stuff from you (When I get money).

Cheers,
Jonny

Good question on the paddles. I think they require the T-rex flybar but am checking. If so then I believe that requires a mod to the flybar case.

Will get back to you.

Gerd

[DierWolf]

Tried Shitty IE and Avant Browser (i usually use Avant since it dont use Microsofts shitty engine)

The link difference in the 2 are at the bottom link its actually using the providers(hosting sites) main name.

Mainly : http://www.fluidreality.co.uk/beltcp/index_files/Page432.htm

while the other link at the top left is trying to goto

http://beltcp.co.uk/index_files/Page432.htm

which does not work from my end.

[DierWolf]

Yes Gorilla gear paddles use Trex V2 Bars.

Did you see my comment above on your pinions.

[DierWolf]

Psilo, you ever think of using some Free web templates?

I could always help you with Graphics to replace with whatever you want..

I kinda like this layout..

http://www.freetemplatesonline.com/templates/Free-Online-Store-Shop-Web-Templates-127.html

[Ber60]

Did some testing to
Top left links don't work
Bottom links work but in the shop when I click on ball-link pliers there is an unfinished page and when I use the "return to product list" at the top I get a blank page after a refresh I get the homepage
I am using windows explorer V6

[DierWolf]

There are many unfinished pages.....

The return to product listing works for me from the pliers page.

Suggest to you to be safe viewing no matter what browser you use entire address or when
doing it like your doing now dont just put \blahblahpage.htm but rather .\blahblahpage.htm

But always safest to use entire link when using subdomains.

[Ronniebiggs]

What about Gyros Gerd? Wouldnt mind a Futaba 401 if there at a reasonable price. Are you going to stock them?

SG90 or 91 servos would be another good stock as I just smashed 2 in a crash. Hence easily smash with the DTS mod so they will always be needed.

Andy

[Grant_beltcp]

Looking good - just a quicky though, are those "youngblood" dampers supposed to be the Trueblood dampers or are they different?

[DierWolf]

Same difference.

[Ronniebiggs]

I have a pack of these from Gerd on there way. I have a massive amount of play on my main blades so hopefully this will sort it.

[Ian 777]

Site is starting to look good Gerd, will certainly use you for helimax gear when the current blade one fails For me V2 head and tail parts would be usefull, chineese weighted tail blade holders. And I will have to get some batteries and a decent charger soon.

All the best:)

[psilo]

Ok got it open by using the Shop link at teh bottom of the main page.


Just a heads up... you have Align pinions on sale, make sure to put a note to them that these will NOT fit on the Belt CP stock motor as that is 2.3mm shaft while align pinions are 3.17mm shafts.

Dierwolf I am using the Align pinions on my stock Esky motor??

Edit: Just checked and the HZ020 set I am selling is for the 2.3mm shaft.

[psilo]

Site is starting to look good Gerd, will certainly use you for helimax gear when the current blade one fails For me V2 head and tail parts would be usefull, chineese weighted tail blade holders. And I will have to get some batteries and a decent charger soon.

All the best:)

Ian, I sold out of the 2100Mah batteries, but I should be getting some 2200Mah 15C batts to try and am also getting a batch of the Imax B6 chargers (should be selling for around £47 I think).

[psilo]

Psilo, you ever think of using some Free web templates?

I could always help you with Graphics to replace with whatever you want..

I kinda like this layout..

http://www.freetemplatesonline.com/templates/Free-Online-Store-Shop-Web-Templates-127.html

I will take a look, does it have a full featured cart that allows for postal calculations based on weight? I am currently looking at using ZenCart as it does everything I need and is free.