Reverse Settings DX6i

[MaxKool]

Hey guys, I just got finished installing some new hitec servos and when I was going through the radio I forgot wich reverse settings I changed. I swapped all the 3 cyclic servos, what should the settings be on the dx6i? N or R for the different servos...


dumb question i know, but Im in a rush to get flying again...

[LockMD]

Hey guys, I just got finished installing some new hitec servos and when I was going through the radio I forgot wich reverse settings I changed. I swapped all the 3 cyclic servos, what should the settings be on the dx6i? N or R for the different servos...


dumb question i know, but Im in a rush to get flying again...


:confused: dont have those servos, just power it up hit throttle hold and see which ones are mis-behaving......if all three then change your swash mix from a - to a + or vice versa.

[MaxKool]

No no no, I just remeber all the stock servos are reverse from every thing else...

I thought I just had to change the settings in the reverse menu. I dont think i have to change anything in the swash mix... I hope not...

With somthing other than stock servos, assuming the stock ones are reverse to other servos. What are your settings in the reverse menu for the differant servos...

[LockMD]

No no no, I just remeber all the stock servos are reverse from every thing else...

I thought I just had to change the settings in the reverse menu. I dont think i have to change anything in the swash mix... I hope not...

With somthing other than stock servos, assuming the stock ones are reverse to other servos. What are your settings in the reverse menu for the differant servos...


I'm running ds285's on cyclic and 3400g on tail

thro N
aile R
elev R
rudd N
gyro N
pitc N

also using a GY401

changing a neg to a pos in the swash mix changes all 3 servos at the same time.

[sokal]

or
thro n
aile r
elev n
rudd n
gyro n
pitch n

and leave the swashmix as is
either way it all works

[Brutus]

I just intalled hitec tail servo had to reverse gyro and servo setting in transmitter. If I understand things correctly you will have to change transmitter opposite of what was set up originally apparently eflite is opposite of most servos....