I got a flightopwer evo-rx 1800 7.4 v. for my trex 600n with the 2n1. Can anyone link me to the balance connector I need that will make it identical to the align battery balancing connector. I cannot find this so I cannot charge my batteries , please help.
redgiki
05-12-2008, 11:16 AM
It's a standard "Thunder Power"-style balancing connector. So the type of connector you need is Female Thunder Power on one end, Male "JST" on the other end, standard wiring. Also, where, the receiver pack is only 2S, balancing isn't strictly required (imbalance is less likely), so you could charge in serial as a 2S LiPo from any of a number of chargers. It needs to be a 7.4v Lithium Ion compatible charger, though.
I tried looking up the connector, but tppacks.com seems to be out of stock on everything. Check any of the other popular online heli sites, or better yet, visit your local hobby shop to talk about your need.
marchambault
05-12-2008, 02:58 PM
The Align / e-flite / electrifly connector is called JST-XH. It can be found on ebay.
http://cgi.ebay.com/3S-Lipo-li-po-Balance-adapter-align-thunder-power-esky_W0QQitemZ360049752549QQihZ023QQcategoryZ34056 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Most online hobby shops sell a female TP to male JST-XH adapters. Just do a little googling. Here's an example:
http://www.techmodelproducts.com/bat_charge.php (scroll down to TP to JST Adapter (3S))