khamdent
05-12-2008, 01:55 AM
Hey Guys,
I have a T-Rex 450 se with DX7-spektrum set-up. My problem is always been the channel 3- servo (elevator-servo would not work). This is an intermittent problem where the elevator servo would not work (no movement) while all others servos are working fine. When this happen, if I unplugged the battery and replug it will work again on initialising. It is definitely not a servo problem because I replaced with new servo and same problem. I believe it is the reciever problem. No pins on the reciever had been damaged, and the plug is not loose- I tried wriggling the plug when the servo not working- this has no effect, but if I unplug the servo or unplug the battery and re-connect everything is fine. The problem can be when I first plug in the battery (more-common) or during flight. Can anybody help out or have opinions ?
I have a T-Rex 450 se with DX7-spektrum set-up. My problem is always been the channel 3- servo (elevator-servo would not work). This is an intermittent problem where the elevator servo would not work (no movement) while all others servos are working fine. When this happen, if I unplugged the battery and replug it will work again on initialising. It is definitely not a servo problem because I replaced with new servo and same problem. I believe it is the reciever problem. No pins on the reciever had been damaged, and the plug is not loose- I tried wriggling the plug when the servo not working- this has no effect, but if I unplug the servo or unplug the battery and re-connect everything is fine. The problem can be when I first plug in the battery (more-common) or during flight. Can anybody help out or have opinions ?