Will these mains work on the Raptor 50?

[alienteabagger]

Part# HMXE4314

Designed for .46-.50 size helicopters, this is the 600mm Long Carbon Fiber Blade Set from Heli-Max.

FEATURES: High-performance carbon fiber blades are very rigid, for fast response A fully symmetrical airfoil makes them ideal for 3D maneuvers Bushings and spacers are included for adapting each blade to two different sizes of bolt holes (3mm & 4mm) and grips (12mm & 14mm) Factory finished in gleaming White gelcoat with an angled stripe showing the carbon weave Preweighted and ready to be balanced and bolted on.

INCLUDES: Two 600mm long carbon fiber blades Two 3mm inside diameter bolt hole adapters Two 4mm inside diameter bolt hole adapters Four fiberglass disc shaped spacers One piece of tracking tape (15mmx175mm)

SPECS: Length: 600mm (23.62") (from the center of the mounting hole to tip) Width: 54.4mm (2.14") Airfoil: fully symmetrical Weight: 120-135g (4.23-4.76oz) per blade

Can be seen here: http://www.helimax-rc.com/accys/hmxe4270.html

[wren1702]

Yes, They'll work.

[BarracudaHockey]

Get some decent blades, those aren't it.

You're better off with Marvikk from http://www.heliproz.com

Those things are about as stiff as dental floss.

[eyeflyhelis]

good for hovering and FF

[alienteabagger]

These are going to prove hard to find... Been looking around on the web and everyone that sells them doesn't have any in stock. I don't do any 3D just mild forward flight and hovering about...

[WayneBrown]

Helimax blades are okay, just very, very light.
If you are wanting speed at any cost, they are okay, I used them for a long time on my t600E, they just don't auto worth a crap.