View Full Version : Logo 600 3d flight time
vicrc
05-12-2008, 08:36 PM
What flight time are you guys getting on your 600 3D, fly-bar or v-bar with EVO 25 3700s or EVOLITE 5350s, or any other packs you may have tried. Would like info on motor and the type of flying; mild or wild. Thanks!
jamesotron99
05-12-2008, 10:11 PM
I get nine to nine and a half minutes from my Logo 600 with 10S EVOlite 5350's and Hacker A50-14S on 17T pinion. Headspeed's about 2100. VBar makes all the difference, I suspect.
th3tick
05-12-2008, 10:49 PM
Still breaking in packs, but it looks like 11-12 minutes for my tame flying style. EVOlite 5350 with Jazz 55-10-32 and Tango 45-07 on VBar. AND LOVING IT!
I swear, it's almost too long for my brain!
John
jamesotron99
05-12-2008, 10:51 PM
I'm seriously starting to think that switching to a Jazz and a Tango on my Logo 600 might be a good idea.
bayselec
05-13-2008, 01:16 AM
Logo 600 3d Flybar Version.
Z50-780kv 13T mod 0.7 sport flying.
Zippy 25c 4000mah 5s packs x 2.
6min flight time put in 2600 - 3000 mah back in.
L600 3D
V-Bar
Hacker A50 14S 10P
2100rpm (at a guess)
18T Pinion
Evolite 5350 10s
Kontronic Power Jazzzz
Flying like a total idiot
7 minutes :)
jamesotron99
05-13-2008, 05:53 AM
L600 3D
V-Bar
Hacker A50 14S 10P
2100rpm (at a guess)
18T Pinion
Evolite 5350 10s
Kontronic Power Jazzzz
Flying like a total idiot
7 minutes :)
Dude, your headspeed must be way higher than 2100. That's what I get on the 17T pinion. Same setup.
sounds a lot lower, maybe just the V Blade Textured Extremes im using
its about 65% governor thoguh