Warning - Check your receiver

[adelmasw]

I had a little bit of vibration on the blade and found that all the plugs on the receiver were working their way out. looks like they do not fit perfectly and the wedge shape would have a tendency to move to the UNplugged position. Seems like there is not enough room for the plugs to rest squarely.

[eugenefelisco]

I had a little bit of vibration on the blade and found that all the plugs on the receiver were working their way out. looks like they do not fit perfectly and the wedge shape would have a tendency to move to the UNplugged position. Seems like there is not enough room for the plugs to rest squarely.
Wow never tought about that. Thats very good info. I will check mine and maybe I can fit a tie-down or a small rubber band my kid have for her teeth. Thank you

[Dynarace]

Mine came through without antenna wires :thumbdown:... But HH was great about sending me a new one quickly.

[Fendbass22]

In a crash with my CX2 I had lost both antennas due to poor solder joints. Check those as well! Thats a hard lesson to learn after a rebuild and 10ft in the air and lose signal.