WayneBrown
10-30-2005, 09:10 PM
not you, the motors...
It sucks, but get another and see if they will honor the align motor...
Robman
11-02-2005, 07:16 PM
Ok Got it going again.. it hovers good and stable but the nose drifts to the left in head lock mode.. In my radio under gryo settings I increased from 70% all the way to 90% in 10% increments but any higher than 75% the tail starts to waggle.. All the linkages are smooth and The servo is a new hs55.. Any suggestions?
Thanks Rob
Robman
11-12-2005, 09:04 PM
Can anyone help me with this Question above.. Also the tail will some times jerk to the right (nose to the left) About 90 deg.. All the linkage is smooth.. :dontknow
HELP! Rob
WayneBrown
11-13-2005, 09:31 AM
Go back to the setup.
Mine did the same after a big crash, and I 'thought' I had the linkage perfect.
Pull the control rod off, loosen the servo mount, and follow the instructions and do the entire setup again.
The jerking described might be one of two things, most likely is it does it when punching the throttle, you can add a revo mix, but it's easier to anticipate and correct for it or making the servo arm a bit longer.
Or it could be a belt tension issue, where the belt stretches and rebounds.. try different tensions.
If you get really stuck, call me when you can fly it, and we'll talk about it.